Waveshare RP2350-One, Onboard PCB Type-A Plug, 4MB Flash MCU Board Based On Raspberry Pi RP2350A

 
Board specifications

• RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom
• Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz
• 520KB of SRAM, and 4MB of on-board Flash memory
• Onboard PCB Type-A male port, plug and play, easy to use
• Castellated module allows soldering direct to carrier boards
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• 29 × multi-function GPIO pins (20× via edge pinout, others via solder points)
• 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels
• Accurate clock and timer on-chip
• Temperature sensor
• Accelerated floating-point libraries on-chip
• 12 × Programmable I/O (PIO) state machines for custom peripheral support

Onboard Type-A Plug

Plug And Play, No Additional Cables Required

C/C++, MicroPython support

Comprehensive SDK, dev resources, tutorials to help you easily get started

dual-core, dual-architecture

Adopts dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz

29 × multi-function GPIO pins

configurable pin function, allows flexible development and integration

What's On Board

1. PCB Type-A plug
2. RT9013-33GB
   500mA low dropout, low noise, ultra-fast LDO
3. WS2812
   RGB LED
4. BOOT button
5. W25Q32JVSSIQ
   4MB NOR-Flash

1. RESET button
2. RP2350A
   Dual-core and dual-architecture design, up to 150 MHz operating frequency
3. RP2350A pins
   10x solder points, including 9x GPIO pins
4. Debug pins

outline dimensions