Φίλτρα

Κατασκευαστής (1)
074.0032
8,00 (9,92 με ΦΠΑ)
DFRobot, DFR0362, 5212019508728

Wireless charging uses an electromagnetic field to transfer energy between two objects. This is usually done with a charging station. Energy is sent through an inductive coupling to an electrical device, which can then use that energy to charge batteries or run the device.


This is a new wireless charging module, which oculd provides 5V@300mA (MAX 600mA) power output. It is using the new technology "resonant magnetic coupling, which will reduce the electricity consumption during power transmission. The transfer efficiency could arrive 90%. It could meet your most project requests.

5V/300mA also available (DFR0362)

Μη Διαθέσιμο Προσθήκη στα αγαπημένα

074.0160
8,00 (9,92 με ΦΠΑ)
DFRobot, DFR0457, 5212019508759
INTRODUCTION In most Arduino projects, relays are the first choice to drive some large current device. It requires a certain amount of current to drive...
Άμεση
+
Προσθήκη στα αγαπημένα

074.0267
8,00 (9,92 με ΦΠΑ)
DFRobot, DFR0386
INTRODUCTION This RTC module is specifically designed for the Raspberry Pi. It communicates with Raspberry Pi through the I2C bus and includes a...
Άμεση
+
Προσθήκη στα αγαπημένα

074.0402
8,06 (9,99 με ΦΠΑ)
DFRobot, DFR0745, DFR0745
DESCRIPTION Wanna buy a simple & practical voice recorder? This one is right for you! The voice recorder module supports 4 controlling modes ( Arduino ,...
Άμεση
+
Προσθήκη στα αγαπημένα

074.0420
8,06 (9,99 με ΦΠΑ)
DFRobot, FIT0801
INTRODUCTION This super-easy-to-use air pump is very suitable for beginners to make inflatable or pneumatic projects. It is basically a  DC motor ,...
Μη Διαθέσιμο Προσθήκη στα αγαπημένα

074.0239
8,20 (10,17 με ΦΠΑ)
DFRobot, SEN0142
INTRODUCTION At the beginning,the inertial measurement unit is an electronic device that measures and reports on...
Άμεση
+
Προσθήκη στα αγαπημένα

074.0263
8,20 (10,17 με ΦΠΑ)
DFRobot, SEN0132
INTRODUCTION This is an Arduino Carbon Monoxide Sensor. It uses MQ7 probe to detect Carbon Monoxide (CO)...
Άμεση
+
Προσθήκη στα αγαπημένα

074.0093
8,25 (10,23 με ΦΠΑ)
DFRobot, SEN0019, 5212019508797

This is an Arduino infrared distance sensor. It has an adjustable detection range, 3cm - 80cm. It is small, easy to use, assemble, and inexpensive.

Μη Διαθέσιμο Προσθήκη στα αγαπημένα

074.0027
8,64 (10,71 με ΦΠΑ)
DFRobot, SEN0193, 5212019508803

This product measures soil moisture levels by capacitive sensing, rather than resistive sensing like other types of moisture sensor. It is made of a corrosion resistant material giving it a long service life. Insert it into soil and impress your friends with the real-time soil moisture data!


The product includes an on-board voltage regulator which gives it an operating voltage range of 3.3 ~ 5.5V. It is compatible with low-voltage MCUs (both 3.3V and 5V logic). To make it compatible with a Raspberry Pi, an ADC converter is required.

This sensor is compatible with our 3-pin "Gravity" interface, which means it can be directly connected to the Gravity I/O Expansion Shield.

The following image shows an example project - a device that notifies you when a plant needs to be watered.

Άμεση
+
Προσθήκη στα αγαπημένα

074.0243
8,70 (10,79 με ΦΠΑ)
DFRobot, SEN0133
INTRODUCTION This is an Arduino hydrogen gas sensor. It has high sensitivity to Hydrogen (H2) and less sensitivity to alcohol, LPG,cooking fumes ....
Άμεση
+
Προσθήκη στα αγαπημένα