Pocket Geiger Radiation Sensor - Type 5 (SEN-14209)

Description: The Type 5 Pocket Geiger Radiation Sensor from Radiation Watch is a highly sensitive radiation sensor designed for the embedded systems market. Capable of detecting Gamma and Beta radiation, this sensor has a simple pulsed output that can be used with any microcontroller. Radiation Watch has a handful of documents and example Arduino code to get you up and running. They have also written a Windows example program in C# (source included!) to output graphs to a computer using an Arduino as the reader.

These small Geiger sensors feature a measurement range of 0.05uSv/h to 10mSv/h at 0.01cpm to 300Kcpm with a required measurement time of two minutes. The Pocket Geiger has an onboard DC boost circuit, so the board can be supplied with a friendly 3V to 9V. Using only 30mW (10mA @ 3V), it is very low power. Additionally, the counter comes with an optional enclosure and 3.5mm cable that allow you to connect the counter to some mobile phones (may not be compatible with phones sold in the EU).

Note: This product is for educational purposes and should not be directly relied upon for determinations regarding one’s health or safety.

Dimensions: 58 x 26 x 11mm

Product Includes:

• Type5 Geiger Sensor board with copper EM shielding
• Brass plates (attach to block beta particles)
• 16” TRRS cable
• Plastic enclosure
• Extra 3.5mm TRRS jack