Bluetooth 2.0 Bee Module For Arduino(tel0023)
Please sign in so that we can notify you about a reply
INTRODUCTION
This DFRobot Bluetooth Bee
Bluetooth wireless module adapts XBEE design. It has a compact size, the
pinout is compatible with XBEE which is suitable for all kinds of
microcontroller such as Arduino who have 3.3V power out, also the module
supports AT commands for parameter setting. (NOTE: You have to use a XBEE adapter for parameter setting. )
The Bluetooth Bee modules comes with an on-board antenna, the
antenna provides better signal quality. It acts like a transparent
serial port, which works with a variety of Bluetooth adapter and
Bluetooth phone.
The module has been tested with all the Bluetooth adapter on the
market matching to use (with the Bluetooth, including laptops and mobile
phones).
This arduino bluetooth module fits Gravity Arduino IO Expansion shield, Gravity Mega Sensor Shield, Romeo V2 and DFRduino Leonardo which has xbee socket
SPECIFICATION
- Bluetooth chip: CSR BC417143
- Bluetooth protocol: Bluetooth Specification v2.0 + EDR
- USB Protocol: USB v1.1/2.0
- Operating frequency: 2.4 ~ 2.48GHz unlicensed ISM band
- Modulation: GFSK (Gaussian Frequency Shift Keying)
- Transmit Power: ≤ 4dBm, Class 2
- Transmission distance: 20 ~ 30m in free space
- Sensitivity: ≤-84dBm at 0.1% BER
- Transfer rate: Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps/1Mbps
- Safety features: Authentication and encryption
- Support profiles: Bluetooth serial port
- Serial port settings: 1200 ~ 1382400 / N / 8 / 1
- Baud rate default: 9600
- Pair: 1234
- Input Voltage: +3.3 DC/50mA
- Operating temperature: -20 ℃ ~ +55 ℃
- Module Size: 32 × 24 × 9mm (1.26 x 0.9 x 0.35in)
DOCUMENTS
SHIPPING LIST
- Bluetooth Bee x1
Πελάτες μας αγόρασαν επίσης
