INTRODUCTION
WT8266-S1 Wi-Fi module is a low consumption, high
performance embedded Wi-Fi network control module designed by Wireless-Tag. It
can meet the IoT application requirements in smart power grids, building
automation, security and protection, smart home, remote health care etc.
The module's core processor arduino
ESP8266
integrates an enhanced version of Tensilica's L106
Diamond series 32-bit processor with smaller package size and 16 bit compact
mode, main frequency support 80 MHz and 160 MHz, support RTOS, integrated Wi-Fi
MAC / BB / RF / PA / LNA, on-board PCB antenna. The ESP8266 WiFi Module
is a self contained SOC with integrated TCP/IP protocol stack that can give any
microcontroller access to your WiFi network.
The module supports standard IEEE802.11 b / g / n protocol, a complete TCP / IP
protocol stack. Users can use the module to add networking capabilities for
existing equipment , also can build a separate network.
SPECIFICATION
·
Operating Voltage: 3.3V
·
Operating Temperature:-40 - 85°C
·
CPU Tensilica L106
·
RAM 50KB(Available)
·
Flash 32MB
·
System:
·
802.11 b/g/n
·
IntegratedTensilica L106 ultra-low
power 32-bitmicro MCU, with 16 bit compact mode,main frequency
·
support 80 MHz and 160 MHz, support
RTOS
·
WIFI 2.4 GHz,supportWPA/WPA2
·
Ultra-Small 18.6mm*15.0mm
·
Integrated 10 bit high precision ADC
·
Integrated TCP/IP Stack
·
IntegratedTR switch、 balun、
LNA、Power amplifier and matching network
·
Integrated PLL、Regulator and power source management components, +20 dBm
output power in 802.11b mode
·
Supports antenna diversity
·
Deep sleep current < 10uA, Power
down leakage current < 5uA
·
It can use an application processor
SDIO 2.0、SPI、 UART
·
Polymerization of STBC、 1x1 MIMO、
2x1 MIMO A-MPDU 、A-MSDU
and 0.4 s guard interval
·
Wake up within 2ms, connect and
transfer data packets
·
Standby power consumption < 1.0mW
(DTIM3)
·
Support AT remote upgrades and cloud
OTA upgrade
·
Support STA/AP/STA+AP operation
modes
·
Weight: 4 g
DOCUMENTS
SHIPPING
LIST
· WT8266-S1 WiFi Module x1