DESCRIPTION
This offline controller is designed for the use of Mini CNC router 1610/2418/3018 and even with more advanced function of tool set, limit switch supportive, Laser supportive; Offline and Bluetooth supportive.
SPECIFICATION
Firmware: GRBL 08, 09, 1.1 and so on Input Voltage: DC 7V- 36V
FEATURES
- 1. Support GRBL and benbox firmware. Support CNC 3-axis laser engraving machine.
- 2. The stroke length isn't limited to 30x18 and 24x18, it can be setting other length. Please set the stroke in the command.
- For example: 3018, please set the stroke in the command, 30cm length and 18cm width;
INSTRUCTIONS
GRBL Off-line Controller
Press Z+ and Z- , the Z axis will move up and down.
Press X+ and X- , the X axis will move left and right.
Press Y+ and Y- , the Y axis will move Front and Back.
Press SPIN : Spindle on (Laser on ), Spindle off (laser off)
Press SMOD: return
Press Z+ for 5 seconds , change the Language to English.
SD Card: Included , you need a SD card reader to write into the root directory G-code files .
Notice:
The Laser Interface is 3 pin on this control board. Only support 42 stepper motor.