BONDTECH DDX V3 FOR CREALITY ENDER / CR-10(S) (Bundle)
DESCRIPTION
The DDX v3 is much easier to install
With the integrated fan shroud and mount included in the DDX v3 adapter sets, the DDX v3 is even easier to install. Snap the fan to the shroud without using screws. Adjust the height of the shroud with one front access screw.
Using a bed probe with DDX v3
The DDX was designed to allow space for the bed probe to be attached to the x-carriage. In models where there is no space to attach a bed probe like the BL Touch, to the X-carriage, a mount can printed and attached to the right hand side of the DDX.
Bondtech DDX Direct Drive eXtruder
This Direct Drive eXtruder from Bondtech is a high performance, high reliability 1,75mm Dual Drive extruder for Creality 3D printers, based on our very popular BMG. Bondtech’s unique Dual-Drive technology combined with either the factory hotend or for even better performance the industry leading hotends Copperhead™ or Mosquito™ from Slice Engineering gives you a direct drive extruder with problems free material feeding and enables the use of a wider range of materials. The housing parts are printed with PA12 (polyamide) for maximum strength and precision using industrial grade SLS technology.
Make your 3D printer even better
Bondtech DDX Direct Drive eXtruder for Creality is designed to give the user more options – different materials; higher flow and/or wider nozzles; thinner layers – and achieve a higher print quality. The DDX is based on the BMG Bondtech Mini Geared extruder featuring our unique Dual-Drive technology. The DDX housing design provides an effective Hot-End cooling. With the 3:1 gearing ratio, high resolution prints with small nozzles or high flow prints with bigger nozzles can be achieved.
Easy To Setup
For ease of setup the kit is attached to the carriage with only 2 screws.
Product includes:
- 1x DDX v3 Extruder
- 1x Nema17 Pancake stepper motor
- 1x Thumbscrew Assembly
- 1x 70cm Stepper motor extension cable
- 1x 60cm PTFE tube
- 1x 7cm Capricorn tube
- 4x Zip-ties
- 3x M3x12mm screw
- 2x M3x20mm screw
- 1x M3 square nut
- 1x M3x10mm button head screw
- 1x 10079-3 PA12 Fan Shroud
- 1x SLS Ender Hotend Adapt
BUNDLE Includes also:
Compatibility Table:
Compatible with the following models:
- Ender-3
- Ender-3 v2;
- Ender-3 Pro;
- Ender-5;
- Ender-5 Pro;
- Ender-5 Plus*1;
- Ender-6
- CR-10 (Mini);
- CR-10S;
- CR-10 S4;
- CR-10 S5.
*1 Using DDX v3 on Ender-5 Plus
On the Ender-5 Plus, the DDX fan shroud will collide with the right hand rail if nothing is changed on the unit. To fix that problem we sell the SLS DDX Bed Rod Holder Set for Ender-5 Plus and supply as alternative the STL file of the new Z-rod holder that can solve this issue. Download the file from the list here.
Step By Step Guides:
These are the guides that apply to the DDX Direct Drive eXtruder for Creality: DDX For Creality Step By Step Guides
Guides For Ender-3 and similar 01. Stripping Down Your Creality Ender-3
02. Installing DDX On Creality Ender-3
Guides For Ender-5 and similar 01. Stripping Down Your Creality Ender-5
