Arduino MKR WAN 1310 - (ABX00029)
Better and More Efficient
The MKR WAN 1310, brings in a series of improvements compared to its predecessor, the MKR WAN 1300. While still based on the Microchip® SAMD21 low-power processor, the Murata CMWX1ZZABZ LoRa® module, and the MKR family’s characteristic crypto chip (the ECC508), the MKR WAN 1310 includes a new battery charger, a 2MByte SPI Flash, and improved control of the board’s power consumption.
Improved Battery Power
The latest modifications have considerably improved the battery life of the MKR WAN 1310. When properly configured, the power consumption is now as low as 104uA! It is also possible to use the USB port to supply power (5V) to the board; run the board with or without batteries - the choice is yours.
On-board Storage
Data logging and other OTA (Over The Air) functions are now possible since the inclusion of the onboard 2MByte Flash. This new exciting feature will let you transfer configuration files from the infrastructure onto the board, create your scripting commands, or simply store data locally to send it whenever the connectivity is best. The MKR WAN 1310’s crypto chip adds further security by storing credentials & certificates in the embedded secure element.
These features make it the perfect IoT node and building block for low-power wide-area IoT devices.
Related Boards
If you are still deciding about the right wireless protocol for your solution, Arduino's MKR family has some alternatives to offer:
- MKR FOX 1200: for your EU solutions on Sigfox infrastructure. Visit its product page here.
- MKR GSM 1400: When looking at global coverage, GSM / 3G is the world's most extended network. Visit its product page here. We also provide you with a bundle including the board and a SIM with a global data plan in case you need it.
- MKR NB 1500: if your solution is designed around Narrowband IoT. Read more about it here.
Getting Started
The Getting Started section contains all the information you need to configure your board, use the Arduino Software (IDE), and start tinkering with coding and electronics.
Arduino IoT Cloud Compatible
Use your MKR board on Arduino's IoT Cloud, a simple and fast way to ensure secure communication for all of your connected Things.
TRY THE ARDUINO IOT CLOUD FOR FREE
Tech specs
The Arduino MKR WAN 1310 is based on the SAMD21 microcontroller.
| SAMD21 Cortex®-M0+ 32bit low power ARM MCU (datasheet) |
| CMWX1ZZABZ (datasheet) |
| 5V |
| ATECC508 (datasheet) |
| rechargeable Li-Ion, or Li-Po, 1024 mAh minimum capacity |
| 3.3V |
| 8 |
| 13 (0 .. 8, 10, 12, 18 / A3, 19 / A4) |
| 1 |
| 1 |
| 1 |
| 7 (ADC 8/10/12 bit) |
| 1 (DAC 10 bit) |
| 8 (0, 1, 4, 5, 6, 7, 8, 16 / A1, 17 / A2) |
| 7 mA |
| 256 KB (internal) |
| 2MByte (external) |
| 32 KB |
| no |
| 32.768 kHz (RTC), 48 MHz |
| 6 |
| Full-Speed USB Device and embedded Host |
| 2dB (bundled pentaband antenna) |
| 433/868/915 MHz |
| EU/US (confirmed) other countries check your region's spectrum availability |
| 67.64 mm |
| 25 mm |
| 32 gr. |
Conformities
The following Declarations of Conformities have been granted for this board: GB4943
ISED/IC
MIC
UKCA
RCM
CE
FCC
RoHS
REACH
WEEE
For any further information about our certifications please visit docs.arduino.cc/certifications
Documentation
OSH: Schematics
The MKR WAN 1310 is open-source hardware! You can build your own board using the following files:
EAGLE FILES IN .ZIP SCHEMATICS IN .PDF FRITZING IN .FZPZ
Pinout Diagram
Download the full pinout diagram as PDF here.
Customers also bought
