Arduino Zero - (ABX00003)

43,55
(54,00 με ΦΠΑ)
070.1347
Άμεση
+
Προσθήκη στα αγαπημένα

Overview

The Zero is a simple and powerful 32-bit extension of the platform established by the UNO. The Zero board expands the family by providing increased performance, enabling a variety of project opportunities for devices, and acts as a great educational tool for learning about 32-bit application development.  The Zero applications span from smart IoT devices, wearable technology, high-tech automation, to crazy robotics. The board is powered by Atmel’s SAMD21 MCU, which features a 32-bit ARM® Cortex® M0+ core. One of its most important features is Atmel’s Embedded Debugger (EDBG), which provides a full debug interface without the need for additional hardware, significantly increasing the ease-of-use for software debugging. EDBG also supports a virtual COM port that can be used for device and bootloader programming.

Warning: Unlike most Arduino boards, the Zero runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board.

The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a AC-to-DC adapter or battery to get started. The Zero is compatible with all the shields that work at 3.3V and are compliant with the 1.0 Arduino pinout.

You can find your board warranty information here.

Note

Arduino boards based on AVR microcontrollers get a reset and restart sketch execution each time the Serial Monitor of the Arduino Software (IDE) is opened. This is also the mechanism used to upload sketches to these boards. This board is different: when the Zero is connected through the Programming Port and you open the Serial Monitor, the board does not automatically reset and the sketch loaded keeps running. To restart the sketch you need to press the reset button on the board itself.

Getting Started

In the Getting Started section, you can find all the information you need to configure your board, use the Arduino Software (IDE), and start to tinker with coding and electronics. To keep your Zero's Bootloader up to date, the the Update Procedure explains what you should do each time there is a new Arduino SAMD Boards release.

Need Help?

Tech specs

MICROCONTROLLERATSAMD21G18, 32-Bit ARM® Cortex® M0+
OPERATING VOLTAGE3.3V
DIGITAL I/O PINS20
PWM PINS3, 4, 5, 6, 8, 9, 10, 11, 12, 13
UART2 (Native and Programming)
ANALOG INPUT PINS6, 12-bit ADC channels
ANALOG OUTPUT PINS1, 10-bit DAC
EXTERNAL INTERRUPTSAll pins except pin 4
DC CURRENT PER I/O PIN7 mA
FLASH MEMORY256 KB
SRAM32 KB
EEPROMNone. See documentation
LED_BUILTIN13
CLOCK SPEED48 MHz
LENGTH68 mm
WIDTH53 mm
WEIGHT12 gr.

Documentation

OSH: Schematics

The Zero is open-source hardware! You can build your own board using the following files:

EAGLE FILES IN .ZIP SCHEMATICS IN .PDF

Pinout Diagram

Download the full pinout diagram as PDF here

MPN
:
ABX00003
EAN
:
7630049200586