Product Description

The RAK5205 LoRa tracker board is built upon the RAK881. At its core is an STM32L1 micro-controller driving Semtech’s SX1276/78 LoRa chip.

GPS is present as well as a number of sensors. The aforementioned makes the board suitable for rapid application development, such as asset tracking, vehicle management, location-based services, environmental monitoring, etc. Additionally, because of its low power consumption in sleep mode, it can provide a long-lasting solution for any battery-powered project.

The support for AT commands makes configuration a breeze. For advanced users is open source support in case a custom firmware is required.

Key Features

• RAK811 (Semtech 1276/78 + STM32L1) at its core
• Ublox Max 7Q GPS Module Built-in
• Bosch BME680 Sensor (Temperature, Humidity, Air Pressure, Gas)
• LIS3DH 3-axis Accelerometer
• Works in Battery/Solar Power Mode
• Sleep Mode consumption down to 14.6uA
• Custom AT command Firmware
• Full LoRaWAN 1.0.2 Stack Support
• Interfaces Include I2C, UART, and ADC
• 96Boards compatible form factor (30pin header)

Packaging

• Board Dimension: 60mm x 30mm x 11.45mm
• Board Weight: Approximately 5.64 oz
• Package Inclusions:
• RAK5205 Board
• GPS antenna
• LoRa antenna
• Jumpers
• DuPont Lines
• Micro USB Cable