Z-Wave Plus Aeotec Z-Pi 7

DESCRIPTION

German engineered to help you get to market quickly and with quality, the Aeotec Z-Pi 7 development kit lets you adapt existing hardware to work with Z-Wave. The Z-Pi 7 turns every Raspberry Pi or Orange Pi into a Z-Wave 700 series Smart Home Gateway. The Z-Pi 7 is connected to the GPIOs of the host, such as a Raspberry Pi, as your primary Z-Wave controller. Then it can be used with any automation software if it supports the Z-Wave Serial Bridge API

Z-Wave development tool

• PCB based Z-Wave antenna used to build a gateway
• Compatible with open-source computer platforms and most typically used with Raspberry Pi

FEATURES

• Name: Z-PI 7
• Model Number: ZWA025
• ZWA025-A: US Frequency 908,42 Mhz
• ZWA025-B: AU Frequency 921,42 Mhz
• ZWA025-C: EU frequency 868,42 Mhz
• Device Type: Z-Wave GPIO Controller
• Z-Wave Plus Certified: Yes
• SmartStart: Yes
• Z-Wave Chip: ZGM130
• Z-Wave Version: Series 700 and Gen7
• Security: S2 native
• QR Code Inclusion: SmartStart native
• Z-Wave SDK: 7.11.0 or later
• Power Supply: GPIO DC 3,3V
• Max Operating Current: 75mA 
• Sensitivity of the RF receiver: 
• US:
  TX Power: +9,3 dBm
  RX sensitivity: -97.5 dBm
  EU:
  TX Power: +4,8 dBm
  RX sensitivity: -97.5 dBm 
• Operating Temperature: 0°C to 40°C / 40°F to 104°F
• Storage Temperature: -20 C to 70 C / -04°F to 158°F
• Product Dimensions: 42 x 35 x 12 mm
• 1,65 x 1,37 x 0,47 Inch
• Operating Distance: 
• More than 200m outdoors
• Up to 100m indoors