INTRODUCTION
The Expansion Shield X200 is a most cost-effective shield which could apply to Raspberry Pi Model B+, Raspberry Pi 2 Model B and newest Raaspberry Pi 3 Model B. It integrates a lot of very useful functions such as RTC real time clock; audio input and output; VGA output; USB hub; WIFI; 8-way GPIO. With this shield, you can build Raspberry Pi projects more easily and save both time and cost.
SPECIFICATION
· Input Voltage: 6V to 21Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi
· VGA output: HDMI to VGA converter supporting up to UXGA (1600×1200) and 1080p with 10-bit DAC
· Audio: 3.5mm MIC in jack
· 3.5mm stereo audio jack
· SPDIF output
· Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
· Wireless: WiFi (IEEE 802.11b/g/n) with external antenna
· IR sensor (38KHz)
· USB Storage: Self-powered USB hub with 3 ports
· Real-time clock (RTC): Based on DS3231SN with included CR2032 battery
· GPIO Control: 8-channel Darlington driver chip (ULN2803) allowing to control electronic circuits which require more current
· Misc: Power output socket
· Camera flex slot so camera can still be used with the expansion board attached
· DIP switch to remove connection from RPi’s pin header
· Directly connected on top of the Raspberry Pi using the board GPIO header pins
· No wiring nor soldering is required
· Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
· Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!
· Dimensions: 85 x 56mm(3.35 x 2.20") (Same size as Raspberry Pi)
Note: When you power Raspberry Pi with the shield power resource, please don't power it again via the Micro-USB port, it will damage the board!
DOCUMENTS
· Driver Download and User Manual
SHIPPING LIST
· X200 Raspberry Pi expansion board x1
· HDMI adapter x1
· USB adapter x1
· 2.4GHz WIFI antenna x1
· nylon spacers (M3 x 20mm) x4
· nylon screws (M3 x 6mm) x8