Raspberry Pi Pico Wireless

Raspberry Pi Pico Wireless

Έφτασε το νέο Raspberry Pi Picο W, ένας μικροελεγκτής σχεδιασμένος εξολοκλήρου από τους μηχανικούς του Raspberry Pi, σε καταπληκτική τιμή, έτοιμο για τις πιο απίστευτες κατασκευές με C/C++ αλλά και με MicroPython!

Ο φθηνότερος επώνυμος μικροελεγκτης από το Raspberry Pi Foundation, σύνδεσε το πάνω στο Raspberry Pi σου ή τον υπολογιστή σου και δημιούργησε τα Project σου με μικρό κόστος αλλά και με την χρήση της MicroPython!

Raspberry Pi Pico W has been designed to be a low-cost yet flexible development platform for RP2040, with a 2.4GHz wireless interface and the following key features:

• RP2040 microcontroller with 2MB of flash memory
• On-board single-band 2.4GHz wireless interfaces (802.11n)
• Micro USB B port for power and data (and for reprogramming the flash)
• 40 pin 21mmx51mm 'DIP' style 1mm thick PCB with 0.1" through-hole pins also with edge castellations
  • Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
  • 23 GPIO are digital-only, with three also being ADC capable
  • Can be surface mounted as a module
• 3-pin ARM serial wire debug (SWD) port
• Simple yet highly flexible power supply architecture
  • Various options for easily powering the unit from micro USB, external supplies, or batteries
• High quality, low cost, high availability
• Comprehensive SDK, software examples, and documentation
• For full details of the RP2040 microcontroller please see the RP2040 Datasheet book. Key features include:
• Dual-core cortex M0+ at up to 133MHz
  • On-chip PLL allows variable core frequency
• 264kByte multi-bank high-performance SRAM
• External Quad-SPI Flash with eXecute In Place (XIP) and 16kByte on-chip cache
• High-performance full-crossbar bus fabric
• On-board USB1.1 (device or host)
• 30 multi-function general purpose I/O (four can be used for ADC)
  • 1.8-3.3V I/O voltage
• 12-bit 500ksps analog to digital converter (ADC)
• Various digital peripherals
  • 2 × UART, 2 × I2C, 2 × SPI, and 16 × PWM channels
  • 1 × timer with 4 alarms, 1 × real-time clock
• 2 × programmable I/O (PIO) blocks, 8 state machines in total
  • Flexible, user-programmable high-speed I/O
  • Can emulate interfaces such as SD card and VGA