SIM7070G NB-IoT / Cat-M / GPRS HAT For Raspberry Pi, Global Band Support, With GNSS Positioning
NB-IOT / CAT-M / GPRS / GNSS HAT
Low Power Narrow Band Cellular IoT Communication Module For Raspberry Pi
Based on SIM7070G, Global Band Support
Features At A Glance
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- Supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
- Supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)
- Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
- Breakout UART control pins, to connect with host boards like Arduino/STM32
- SIM card slot, supports ONLY 1.8V SIM card (3V SIM card is not available)
- 2x LED indicators, easy to monitor the working status
- Baudrate: 300~3686400 bps
- Common baudrate auto-negotiation: 9600/19200/38400/57600/115200 bps
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Specifications
NB-IOT/CAT-M/2G | |
---|---|
Band | NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85 |
Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85 | |
GSM/GPRS/EDGE: 850/900/1800/1900MHz | |
Data rate | NB-IoT: 136Kbps(DL)/150Kbps(UL) |
Cat-M: 589Kbps(DL)/1119Kbps(UL) | |
GPRS: 85.6Kbps(DL)/85.6Kbps(UL) | |
EDGE: 236.8Kbps(DL)/236.8Kbps(UL) | |
SIM card support | NB-IoT/Cat-M/2G card (1.8V SIM card ONLY) |
Applicable region | global |
GNSS | |
Receiver type | 16-channel |
C/A Code | |
Band | GPS L1: 1575.42 ± 1.023MHz |
GLONASS L1: 1598.0625 ~ 1605.375MHz | |
BDS B1: 1559.052 ~ 1591.788MHz | |
Galileo L1: 1575.42 ± 1.023MHz | |
Data format | NMEA-0183 |
Antenna | Active antenna |
OTHER | |
Power supply | 5V |
Operating voltage | 5V / 3.3V (configured via 0Ω resistor) |
Current consumption | about 41mA (idle mode) |
Operating temperature | -40°C ~ 85°C |
Storage temperature | -45°C ~ 90°C |
Dimensions | 30.50mm × 65.00mm |
Standard Raspberry Pi 40PIN GPIO
Compatible With Raspberry Pi Series Boards
Global Band Support Of NB-IoT/Cat-M/2G
NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85 Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85 GSM/GPRS/EDGE: 850/900/1800/1900MHz
Cloud Communication
Supports Communication Protocols Including TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
GNSS Positioning
Supports GPS, BeiDou, GLONASS, Galileo Positioning
What's On Board
- SIM7070G
- MP1482 power chip
- RT9193-33 power chip
- Raspberry Pi GPIO header for connecting with Raspberry Pi
- USB interface for testing AT Commands, getting GPS positioning data, etc.
- SIM7070G control interface for connecting with host boards like Arduino/STM32
- SIM card slot supports 1.8V SIM card ONLY
- GNSS antenna connector
- LTE antenna connector
- Module power key
- Network status indicator
- Power indicator
- Operating voltage selection A: set IO level as 5V B: set IO level as 3.3V (default)
- DTR selection A: DTR is connected to P26 B: DTR is disconnected (default)
- PWR selection A: PWR is connected to P4 (default) B: PWR is connected to power supply
Pinout Definition
Outline Dimensions
Resources & Services