RP2040-LCD-0.96, A Low-Cost, High-Performance Pico-Like MCU Board Based On Raspberry Pi Microcontroller RP2040
RP2040 MCU Board With LCD
a Pico-like MCU board based on Raspberry Pi RP2040
Compatible With Most Of The Raspberry Pi Pico Add-On Modules
Board Specifications
RP2040-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi's RP2040 microcontroller chip, as same as the one on Raspberry Pi Pico. For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available, which makes it easy for you to get started, and integrate it into end products quickly.
In addition, there's also an onboard 0.96-inch IPS display, Lithium battery recharge/discharge header, and high-efficiency DC-DC buck-boost chip.
Key features include:
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- USB-C connector, keeps it up to date, easier to use
- 0.96inch 160×80 pixels 65K colorful IPS LCD display
- Lithium battery recharge/discharge header, suitable for mobile devices
- Onboard DC-DC chip MP28164, high-efficiency DC-DC buck-boost chip, maximum 2A load current
- The castellated module allows soldering direct to carrier boards (there should be a dedicated cut-out for embedding the bottom components)
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
Pinheader Options
C/C++, MicroPython Support
Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started
Dual-Core Arm Processor
Dual-Core Arm Cortex M0+ Processor, Flexible Clock Running Up To 133 MHz
26 × Multi-Function GPIO Pins
Configurable Pin Function, Allows Flexible Development And Integration
What's On Board
- USB Type-C connector
- BOOT button
Press it when resetting to enter download mode - RESET button
- 0.96inch IPS LCD display
160 × 80 pixels, 65K colorful - Battery header
MX1.25 header, for a 3.7V Lithium battery, allows recharging the battery and powering the board at the same time - MP28164
high-efficiency DC-DC buck-boost chip
- ETA6096
high-efficiency Lithium battery recharge manager - RP2040
dual-core processor, up to 133MHz operating frequency - W25Q16JVUXIQ
2MB NOR-Flash - DEBUG points
- Pinout
compatible with Raspberry Pi Pico
Outline Dimensions
Resources & Services
Wiki: RP2040-LCD-0.96
Selection Guide
BRAND | Raspberry Pi | Waveshare | ||
---|---|---|---|---|
PRODUCT | Original | Mini ver. | LCD ver. | Plus ver. |
PROCESSOR | Raspberry Pi official RP2040 microcontroller | |||
REGULATOR | RT6150 (DC-DC, 800mA) | ME6217 (LDO, 800mA) | TPS63000 (DC-DC, 1800mA) | |
USB | Micro USB | Type-C | ||
FLASH | 2MB | 4MB | ||
BATTERY HEADER | N/A | Yes(concurrent recharging and powering) | ||
INTEGRATED LCD | N/A | 0.96inch IPS LCD | N/A |