SIM800 GSM GPRS Add-on V2.0 Message Module Expansion Board for Raspberry Pi

GSM GPRS Add-on V2.0 Message Module Expansion Board for Raspberry Pi

Description:

Raspberry PI GSM Add-on V2.0 is customized for Raspberry Pi interface based on SIM800 quad-band GSM/GPRS/BT module. AT commands can be sent via the serial port on Raspberry Pi, thus functions such as dialing and answering calls, sending and receiving messages and surfing on line can be realized. Moreover, the module supports powering-on and resetting via software.

Feature:

Quad-Band 850/ 900/ 1800/ 1900 MHz

GPRS multislot class 12

Operation temperature: -40°C to +85 °C

Operation Level: Digital 3.3V DC

Interface: UART

Baud rate: 9600(default)

Indicators

PWR (Power): When there is normal supply to the board, the indicator keeps on.

8STATUS (SIM800 status): When SIM800 works normally, the indicator keeps on.

NET (SIM800 network status): used to indicate network status, the working status of the indicator is as below:

Status SIM800 behavior

OFF SIM800 does not work

64ms on/800ms off SIM800 does not find network

64ms on/3000ms off SIM800 registers the network

64ms on/300ms off GPRS communicates

Document link: http://wiki.iteadstudio.com/RPI_SIM800_GSM/GPRS_AD...

Package Included:

1 X SIM800 Module

1 X Antenna