Teltonika TRB142 LTE RS232 Gateway

99,19
(123,00 inc tax)
033.1516
In stock
+
Add to Wishlist

TRB142

Robust and reliable RS232 to 4G LTE Cat1 IoT gateway. Linux based advanced firmware with firewall and VPN functionality is perfect for upgrading connectivity for existing or new equipment.

Learn more on wiki page


Description

TRB family devices are designed to be small, lightweight and energy efficient - allowing you to do IoT projects with ease. TRB142 comes with widely used RS232 port for remote device management. It contains a high performance ARM Cortex-A7 1.2GHz processor and 128 megabytes of RAM. It is equipped with mission-critical LTE capabilities and a Linux environment offering high degree of customization.


Features

MOBILE
Mobile module4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
BridgeDirect connection (bridge) between mobile ISP and device on LAN
StatusSignal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received
SMS/CallSMS status, SMS configuration, Call utilities
NETWORK
Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SSL v3, TLS, SSH, DHCP, SNMP, MQTT
RoutingStatic routing
Connection monitoringPing Reboot, Periodic Reboot, LCP and ICMP for link inspection, Wget
FirewallPort forwards, traffic rules, custom rules
DHCPStatic and dynamic IP allocation
DDNSSupported >25 service providers, others can be configured manually
SECURITY
AuthenticationPre-shared key, digital certificates, X.509 certificates
FirewallPre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
Access controlFlexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPNMultiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN EncryptionDES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsecIKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GREGRE tunnel
PPTP, L2TPClient/Server services can run simultaneously
SERIAL COMMUNICATION MODES
ModesConsole, OverIP, Modem (Full or Partial control), Modbus RTU master, Modbus gateway, NTRIP client
MODBUS
MODBUS TCP SLAVE
ID filteringRespond to one ID in range [1;255] or any
Allow remote accessAllow access through WAN
Custom registersModbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality
MODBUS TCP MASTER
Supported functions01, 02, 03, 04, 05, 06, 15, 16
Supported data formats8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
MODBUS RTU MASTER
Suported baud ratesFrom 300 to 115200
Supported functions01, 02, 03, 04, 05, 06, 15, 16
Supported data formats8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
Number of data bitsFrom 5 to 8
Number of stop bits1 or 2
ParityNone, Even, Odd
Flow controlNone, RTS/CTS, Xon/Xoff
MODBUS DATA TO SERVER
ProtocolHTTP(S), MQTT
MONITORING & MANAGEMENT
WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, system log, kernel log
FOTAFirmware update from sever, automatic notification
SSHSSH (v1, v2)
SMSSMS status, SMS configuration
MQTTMQTT Broker, MQTT publisher
JSON-RPCManagement API over HTTP/HTTPS
ModbusModbus TCP status/control
RMSTeltonika Remote Management System (RMS)
SYSTEM CHARACTERISTICS
CPUARM Cortex-A7 1.2 GHz CPU
RAM128 MB (50 MB available for userspace)
FLASH memory512 MB (200 MB available for userspace)
FIRMWARE / CONFIGURATION
WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTAUpdate FW/configuration from server
RMSUpdate FW/configuration for multiple devices
Keep settingsUpdate FW without losing current configuration
FIRMWARE CUSTOMIZATION
Operating systemRutOS (OpenWrt based Linux OS)
Supported languagesBusybox shell, Lua, C, C++
Development toolsSDK package with build environment provided
INPUT/OUTPUT
Configurable I/O2 x Digital Inputs/Outputs
EventsSMS status
POWER
Connector4 pin industrial DC power socket
Input voltage range9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10μ max
Power consumption< 5 W
PHYSICAL INTERFACES (PORTS, LEDS, ANNTENAS, BUTTONS, SIM)
RS232RS232 interface, DB9 socket, 5 pin configuration with flow control
I/Os2 Inputs/Outputs pin on 4 pin power connector
USBVirtual network interface via USB
Status LEDs3 x connection type status LEDs, 5 x connection strength LEDs, 1x Power LED
SIM1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
Power4 pin power connector with 2 x configurable Digital Inputs/Outputs
Anntenas1 x SMA for LTE
ResetRestore factory settings button
PHYSICAL SPECIFICATIONS
Casing materialAluminum housing
Dimensions60 mm x 70 mm x 18 mm (H x W x D)
Weight135 g
Mounting optionsBottom and sideways DIN rail, Flat surface and direct PCB on DIN-Rail mounting options
OPERATING ENVIRONMENT
Operating temperature-40 °C to 75 °C
Operating humidity10 % to 90 % non-condensing
Ingress Protection RatingIP30
REGULATORY & TYPE APPROVALS
RegulatoryCE/RED, EAC, RoHS, WEEE
EMI
StandardsDraft ETSI EN 301 489-1 V2.2.0, Draft EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0
ESDEN 61000-4-2:2009
RSEN 61000-4-3:2006 + A1:2008 + A2:2010
EFTEN 61000-4-4:2012
Surge protectionEN 61000-4-5:2014
CSEN 61000-4-6:2014
DIPEN 61000-4-11:2004
RF
StandardsEN 300 511 V12.5.1, ETSI EN 301 908-1 V11.1.1, ETSI EN 301 908-2 V11.1.2, ETSI EN 301 908-13 V11.1.2
SAFETY
StandardsIEC 62368-1:2014(Second Edition), EN 62368-1:2014+A11:2017
EN 50385:2017
EN 62232:2017

STANDART PACKAGE CONTAINS

  • TRB142 board
  • Euro PSU
  • 1 x LTE antenna (magnetic mount, SMA male, 3 m cable)
  • Micro-USB cable (0.8 m)
  • 1 x hex key
  • QSG (Quick Start Guide)
  • Packaging box
MPN
:
TRB142

Datasheet (Datasheet-TRB142-v1.5.pdf, 2,854 Kb) [Download]

Σχετικά Προϊόντα

6,45 (8,00 inc tax)
+