Εγγύηση:
- 1 έτος
Start your 100 Gigabit journey with our new flagship product: the Cloud Core Router 2216! Its powerful 16-core CPU can trade blows with the mighty 72-core Tile CPU of our previous flagship - the CCR1072.
But the exceptional Marvell Prestera Aldrin2 switch-chip really takes it to the next level with L3 Hardware Offloading! Our previous CCR2116 featured a switch-chip with four 10G CPU connection lines, but this time there are four 25G lines!
There are 2x QSFP28 cages for blazing-fast 100 Gigabit connectivity, 12x SFP28 cages for 25 Gigabit networking, and a Gigabit Ethernet port. The device comes with 16 GB of RAM, decent NAND storage, and two M.2 SATA slots for additional storage. There are four hot-swappable fans, as well as dual-redundant hot-swap power supplies. And these PSUs might look familiar if you have used our CCR1072 before: you can keep using your previous hot-swap power supplies and SFP modules.
You’re saving time and money on accessories, while also getting better performance with lower power consumption.. This is the perfect drop-in upgrade for existing CCR1072 setups!
Specifications
Details | |
---|---|
Product code | CCR2216-1G-12XS-2XQ |
Architecture | ARM 64bit |
CPU | AL73400 |
CPU core count | 16 |
CPU nominal frequency | 2000 MHz |
Switch chip model | 98DX8525 |
Dimensions | 443 x 367 x 44 mm |
RouterOS license | 6 |
Operating System | RouterOS (v7 only) |
Size of RAM | 16 GB |
Storage size | 128 MB |
Storage type | NAND |
MTBF | Approximately 200'000 hours at 25C |
Tested ambient temperature | -20°C to 60°C |
IPsec hardware acceleration | Yes |
Powering
Details | |
---|---|
Number of AC inputs | 2 |
AC input range | 100-240 |
Max power consumption | 128 W |
Max power consumption without attachments | 80 W |
Cooling type | 4 fans |
Ethernet
Details | |
---|---|
10/100/1000 Ethernet ports | 1 |
Fiber
Details | |
---|---|
Number of 25G SFP28 ports | 12 |
Number of 100G QSFP28 ports | 2 |
Peripherals
Details | |
---|---|
Serial console port | RJ45 |
Number of M.2 slots | 2 |
Other
Details | |
---|---|
CPU temperature monitor | Yes |
PCB temperature monitor | Yes |
Voltage Monitor | Yes |
Certification & Approvals
Details | |
---|---|
Certification | CE, EAC, ROHS |
IP | 20 |
Included parts
- IEC cord
- IEC cord
- Rackmount ears
- Cable managment brackets
- K-82 fastening set
- Rackmount rear support ears (2/2)
Ethernet test results
CCR2216-1G-12XS-2XQ | AL73400 all port test (CCR2216) | ||||||
Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Bridging | none (fast path) | 6075.3 | 73778.4 | 10300.9 | 42192.5 | 22954.5 | 11752.7 |
Bridging | 25 bridge filter rules | 3411.1 | 41424.4 | 3416.1 | 13992.3 | 2940.8 | 1505.7 |
Routing | none (fast path) | 5709.5 | 69336.2 | 11033.3 | 45192.4 | 29985.8 | 15352.7 |
Routing | 25 simple queues | 5252.4 | 63785.1 | 6355.7 | 26032.9 | 6079.5 | 3112.7 |
Routing | 25 ip filter rules | 3789.4 | 46018.5 | 3797 | 15552.5 | 3267.1 | 1672.8 |
Routing | none (L3HW) | 16254.8 | 197398.3 | 46992.5 | 192481.3 | 284090.9 | 145454.5 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
IPsec test results
CCR2216-1G-12XS-2XQ | AL73400 IPsec throughput | ||||||
Mode | Configuration | 1400 byte | 512 byte | 64 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Single tunnel | AES-128-CBC + SHA1 | 179.7 | 2012.6 | 186.4 | 763.5 | 182.8 | 93.6 |
256 tunnels | AES-128-CBC + SHA1 | 366.8 | 4108.2 | 667.3 | 2733.3 | 668.8 | 342.4 |
256 tunnels | AES-128-CBC + SHA256 | 366.8 | 4108.2 | 666.2 | 2728.8 | 670.4 | 343.2 |
256 tunnels | AES-256-CBC + SHA1 | 366.2 | 4101.4 | 667.6 | 2734.5 | 668.8 | 342.4 |
256 tunnels | AES-256-CBC + SHA256 | 366.2 | 4101.4 | 670 | 2744.3 | 670.4 | 343.2 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results