MikroTik RB1100AHx4, 4x1.4GHz, 1GB, 128MB, 13xGigabit, microSD, Dual PSU, L6

235,48
(292,00 με ΦΠΑ)
033.1164
Μη Διαθέσιμο

Εγγύηση:

  • 1 έτος

RB1100AHx4

Introducing RB1100AHx4, 13x Gigabit Ethernet ports Router, powered by Annapurna Alpine AL21400 CPU with four Cortex A15 cores, clocked at 1.4GHz each, for a maximum throughput of up to 7.5Gbit. The device supports IPsec hardware acceleration (up to 2.2Gbps with AES128).

Unit comes with 1U rackmount case, RS232 serial port and dual redundant power supplies (with -48v DC telecom power and 802.3at/af support).

General

Details
Product code RB1100x4
Architecture ARM 32bit
CPU AL21400-1400-A0-E-1AN-8-C
CPU core count 4
CPU nominal frequency 1.4 GHz
CPU Threads count 4
Dimensions 444 x 148 x 47 mm
License level 6
Operating System RouterOS
Size of RAM 1 GB
Storage size 128 MB
Storage type NAND

Powering

Details
Max Power consumption 20W
Number of DC inputs 2 (PoE-IN, 2-pin terminal)
PoE in 802.3af/at
PoE in input Voltage 20-57 V
2-pin terminal input Voltage -48, 12-57 V
Number of AC inputs 2
AC input range 100-240 V

Ethernet

Details
10/100/1000 Ethernet ports 13

Peripherals

Details
Serial port RS232

Other

Details
Current Monitor Yes
PCB temperature monitor Yes
Voltage Monitor Yes

Ethernet test results

RB1100x4 AL21400 1G all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 606.5 7,365.3 1,736.4 7,112.3 5,509.7 2,821.0
Bridging 25 bridge filter rules 606.5 7,365.3 1,107.8 4,537.5 1,153.2 590.4
Routing none (fast path) 606.5 7,365.3 1,736.4 7,112.3 5092.3 2,607.3
Routing 25 simple queues 606.5 7,365.3 933.6 3,824.0 960.3 491.7
Routing 25 ip filter rules 543.7 6,602.7 561.8 2,301.1 564.6 289.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

IPsec test results

RB1100x4 RB1100AHx4 IPsec throughput
Mode Configuration 1400 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Single tunnel AES-128-CBC + SHA1 122.0 1366.4 124.9 511.6 127.0 65.0
256 tunnels AES-128-CBC + SHA1 192.7 2158.2 200.5 821.2 203.4 104.1
256 tunnels AES-128-CBC + SHA256 192.4 2154.9 200.5 821.2 203.4 104.1
256 tunnels AES-256-CBC + SHA1 180.0 2016.0 188.2 770.9 190.3 97.4
256 tunnels AES-256-CBC + SHA256 180.0 2016.0 188.2 770.9 190.3 97.4
256 tunnels AES-128-GCM 192.7 2158.2 202.2 828.2 203.4 104.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Included parts


More info

MPN
:
RB1100AHx4
EAN
:
4752224002662