Εγγύηση:
- 1 έτος
hAP ac lite tower
The hAP ac lite is a Dual-concurrent Access Point, that provides Wifi
coverage for 2.4GHz and 5GHz frequencies at the same time.
Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet
ports (PoE output on port #5), dual-chain 802.11b/g/n 2.4GHz wireless, single
chain 802.11ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4
license.
New design universal case allows unit to be positioned either horizontally
(desktop) or vertically (tower case). Wall anchored mounting kit is provided.
We have two versions available - RB952Ui-5ac2nD-TC (International) and
RB952Ui-5ac2nD-TC-US (USA). RB952Ui-5ac2nD-TC-US (USA) is factory locked for
2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be
removed. RB952Ui-5ac2nD-TC (International) supports 2412-2484MHz and 5150MHz -
5875MHz range.
Product specifications
Details |
|
Product code |
RB952Ui-5ac2nD-TC |
CPU nominal frequency |
650 MHz |
CPU core count |
1 |
Size of RAM |
64 MB |
10/100 Ethernet ports |
5 |
Wireless standards |
802.11a/n/ac |
Wireless chip model |
QCA-9887 |
Secondary wireless standards |
802.11b/g/n |
Secondary wireless chip model |
QCA9531 |
Number of USB ports |
1 |
Power Jack |
1 |
PoE in |
Yes |
PoE out |
Yes |
Supported input voltage |
10 V - 30 V |
Dimensions |
34 x 119 x 98mm |
Operating System |
RouterOS |
License level |
4 |
Antenna gain DBI |
2 |
CPU |
QCA9531 |
Max Power consumption |
8W |
USB Power Reset |
Yes |
USB slot type |
USB type A |
Number of chains |
1 |
Storage type |
FLASH |
Storage size |
16 MB |
Wireless specifications
2.4 GHz |
|||
Transmit power (dBm) |
Receive Sensitivity |
Transmit power (mW) |
|
1MBit/s |
22 |
-96 |
158 |
11MBit/s |
22 |
-89 |
158 |
6MBit/s |
20 |
-93 |
100 |
54MBit/s |
18 |
-74 |
63 |
MCS0 |
20 |
-93 |
100 |
MCS7 |
16 |
-71 |
40 |
5 GHz | |||
Transmit power (dBm) | Receive Sensitivity | Transmit power (mW) | |
6MBit/s | 23 | -93 | 200 |
54MBit/s | 20 | -75 | 100 |
MCS0 | 23 | -93 | 200 |
MCS7 | 19 | -71 | 79 |
MCS9 | 16 | -63 | 40 |
wireless parameters may be limited in software, depending on your local
regulatory limitations
Included parts
Ethernet test results
RB952Ui-5ac2nD-TC |
QCA9531 (650Mhz) 100M all port test |
||||||
Mode |
Configuration |
1518 byte |
512 byte |
64 byte |
|||
kpps |
Mbps |
kpps |
Mbps |
kpps |
Mbps |
||
Bridging |
none (fast path) |
40.6 |
493.0 |
117.4 |
480.9 |
217.0 |
111.1 |
Bridging |
25 bridge filter rules |
40.6 |
493.0 |
70.1 |
287.1 |
70.9 |
36.3 |
Routing |
none (fast path) |
40.6 |
493.0 |
117.4 |
480.9 |
200.8 |
102.8 |
Routing |
25 simple queues |
40.6 |
493.0 |
79.6 |
326.0 |
90.8 |
46.5 |
Routing |
25 ip filter rules |
40.6 |
493.0 |
42.2 |
172.8 |
43.2 |
22.1 |
1.
All tests are done
with Xena Networks specialized test equipment (XenaBay),and done according to
RFC2544 (Xena2544)
2.
Max throughput is
determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512,
1518 byte packet sizes
3.
Values in Italic
indicate that max throughput was reached without maxing out CPU, but because
board interface configuration was maxed out
4.
Test results show
device maximum performance, and are reached using mentioned hardware and
software configuration, different configurations most likely will result in
lower results
More info
- Brochure
- Quick Guide
- High-res image : [1][2][3][4][5][6]
- RouterOS software manual