Εγγύηση:
- 1 έτος
CRS112-8P-4S-IN is an eight Gigabit RJ45 port PoE switch, that offers different power output options: autosensing 802.3af/at PoE/PoE+ and Passive PoE, and four SFP ports provide optical fiber connectivity options to support uplinks of up to 1 Gbps.
CRS112-8P-4S-IN is equipped with 12 independent switching ports. 28 V 3.4 A power supply is already included in the box. There is secondary DC jack on the back of the enclosure that supports 48-57 V power supply (not included, can be purchased separately). CRS112-8P-4S-IN can power 802.3af/at devices if 48-57 V DC input is used (unit will automatically detect and provide correct power to devices). Max current is 1 A per port if input voltage is 18-28 V, 450 mA if 48-57 V. Total limit is 2.8A@24V and 1.4A@48-57V.
Specifications
Details | |
---|---|
Product code | CRS112-8P-4S-IN |
Architecture | MIPSBE |
CPU | QCA8511 |
CPU core count | 1 |
CPU nominal frequency | 400 MHz |
License level | 5 |
Size of RAM | 128 MB |
Storage size | 16 MB |
Storage type | FLASH |
Powering
Details | |
---|---|
Max Power consumption | 10W |
PoE out | 802.3af/at |
Number of DC inputs | 2 (DC jack) |
DC jack input Voltage | 18 - 57 V |
Ethernet
Details | |
---|---|
10/100/1000 Ethernet ports | 8 |
Fiber
Details | |
---|---|
SFP ports | 4 |
Peripherals
Details | |
---|---|
Serial port | RJ45 |
Other
Details | |
---|---|
PCB temperature monitor | Yes |
Included parts
Test results
Switching results
CRS112-8P-4S-IN | |||||||
---|---|---|---|---|---|---|---|
Mode | Configuration | 64 byte | 512 byte | 1518 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Switching | Non blocking Layer 2 throughput | 17,857.1 | 9,142.9 | 2,819.5 | 11,548.9 | 975.3 | 11,844.0 |
Switching | Non blocking Layer 2 capacity | 17,857.1 | 18,285.7 | 2,819.5 | 23,097.7 | 975.3 | 23,687.9 |
Switching | Non blocking Layer 1 throughput | 17,857.1 | 12,000.0 | 2,819.5 | 12,000.0 | 975.3 | 12,000.0 |
Switching | Non blocking Layer 1 capacity | 17,857.1 | 24,000.0 | 2,819.5 | 24,000.0 | 975.3 | 24,000.0 |
Ethernet test results
CRS112-8P-4S-IN | QCA8511 1G all port test | ||||||
Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Bridging | none | 48.0 | 582.9 | 73.5 | 301.1 | 78.0 | 39.9 |
Bridging | 25 bridge filter rules | 26.1 | 317.0 | 28.6 | 117.1 | 29.6 | 15.2 |
Routing | none | 46.5 | 564.7 | 65.7 | 269.1 | 71.1 | 36.4 |
Routing | 25 simple queues | 14.5 | 176.1 | 16.1 | 65.9 | 16.8 | 8.6 |
Routing | 25 ip filter rules | 7.8 | 94.7 | 8.0 | 32.8 | 8.3 | 4.2 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Support & Downloads
- 1Gbps
- IEEE 802.3at/af - PoE+ (48V)
- 24V Passive PoE
- 10-57VDC