Εγγύηση:
- 1 έτος
CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. PoE-Out is passed over mode B pins (4,5+)(7,8-). The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included).
CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in. The device consumes up to 44 W leaving guaranteed 450 W (3x150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W of power with any power output option you choose.
The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with disruptive price, providing best price/performance on the market.
Specifications
Details | |
---|---|
Product code | CRS328-24P-4S+RM |
Architecture | ARM 32bit |
CPU | 98DX3236A1-BTD4C000 |
CPU core count | 1 |
CPU nominal frequency | 800 MHz |
Dimensions | 443 x 305 x 44 mm |
License level | 5 |
Operating System | RouterOS / SwitchOS |
Size of RAM | 512 MB |
Storage size | 16 MB |
Storage type | FLASH |
Tested ambient temperature | -20 + 60 degrees C |
Powering
Details | |
---|---|
Max Power consumption | 44W |
PoE out | 802.3af/at |
Number of AC inputs | 1 |
AC input range | 100-240 V |
Ethernet
Details | |
---|---|
10/100/1000 Ethernet ports | 24 |
Fiber
Details | |
---|---|
SFP+ ports | 4 |
Peripherals
Details | |
---|---|
Serial port | RJ45 |
Other
Details | |
---|---|
CPU temperature monitor | Yes |
PCB temperature monitor | Yes |
Included parts
Switching results
CRS328-24P-4S+RM | |||||||
---|---|---|---|---|---|---|---|
Mode | Configuration | 64 byte | 512 byte | 1518 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Switching | Non blocking Layer 2 throughput | 95,238.1 | 48,761.9 | 15,037.6 | 61,594.0 | 5,201.6 | 63,167.8 |
Switching | Non blocking Layer 2 capacity | 95,238.1 | 97,523.8 | 15,037.6 | 123,188.0 | 5,201.6 | 126,335.5 |
Switching | Non blocking Layer 1 throughput | 95,238.1 | 64,000.0 | 15,037.6 | 64,000.0 | 5,201.6 | 64,000.0 |
Switching | Non blocking Layer 1 capacity | 95,238.1 | 128,000.0 | 15,037.6 | 128,000.0 | 5,201.6 | 128,000.0 |
Ethernet test results
CRS328-24P-4S+RM | 98DX3236A1 all port test | ||||||
Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Bridging | none (fast path) | 81.3 | 987.3 | 235 | 962.6 | 296 | 151.6 |
Bridging | 25 bridge filter rules | 81.3 | 987.3 | 90.7 | 371.5 | 90.9 | 46.5 |
Routing | none (fast path) | 81.3 | 987.3 | 235 | 962.6 | 261.9 | 134.1 |
Routing | 25 simple queues | 81.3 | 987.3 | 112.6 | 461.2 | 111.5 | 57.1 |
Routing | 25 ip filter rules | 59.8 | 726.2 | 61.4 | 251.5 | 59.5 | 30.5 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Support & Downloads
- 1Gbps
- 10Gbps
- IEEE 802.3at/af - PoE+ (48V)
- 24V Passive PoE
- 100-240VAC