QuWireless QuPoE Switch SCA6E v2 (SCA6E-V2-PCB)

PoE switch powered by PoE PSU or typical PSU through high power connector

PoE switch dedicated to power:

• 1x Teltonika
• RUT240 / RUT360 / RUT950 / RUT955 / RUTX09 / RUTX10 / RUTX11 / RUTX12 / RUTX14
• and 4x CCTV cameras with active PoE 802.3af/at.

This switch can be powered by two inputs: passive PoE on LAN_5 or by connecting wires directly to terminal block DC_IN. If both are used simultaneously, the source with higher voltage is the one which supply power to device. This can by used to automatically switch to backup power supply when other (with higher voltage) fails. Terminal block is capable to deliver 130W to powered devices, which is not possible through PoE due limited maximum current of Ethernet cables.

SPECIFICATION

LAN PORTS: 6x RJ45 10/100Mbps

POWER INPUT: 1x 2-way terminal block 44-60V / max. 130W (DC_IN)

POE INPUT: 1x Passive PoE input 44-60V (LAN_5)

POE OUTPUT: 4x Active PoE 802.3af/at (LAN_1-4), 1x Passive PoE output 24V/24W (LAN_6)

POE OUTPUT PROTECTION: LAN_1-4: 0.75A, LAN_5: 1.25A (separate resettable fuses)

PASSIVE POE MODE: mode B (4,5+) (7,8-)

LEDS: 1x Power on (white, on board), 6x Link (orange, on port), 6x Transmit (green, on port)

OPERATING TEMPERATURE: -10°C … +40°C

INSTALLATION: 4x holes ⌀2.5mm

DIMENSIONS: 73mm x 145mm x 17mm (WxLxH)

WEIGHT: 75g