Waveshare RS485 TO POE ETH (B)

24,19
(30,00 inc tax)
070.1376
In stock
+
Add to Wishlist

Industrial Serial Server, RS485 To RJ45 Ethernet, TCP/IP To Serial, Rail-Mount Support, With POE Function RS485 To RJ45 Ethernet Module

Rail-mount RS485 serial server

 
Version Options

RS485 TO ETH (B)
Common Ethernet port


 

RS485 TO POE ETH (B)
PoE Ethernet port + Electrical isolation

These two versions are the same in software functions, while RS485 TO POE ETH (B) is the hardware upgrade version, support PoE Ethernet port power supply, with power and signal isolation protection, which is safer for industrial applications.

Features At A Glance

This is an RS485 device data acquisitor / IoT gateway designed for the industrial environment. It combines multi functions in one, including serial server, Modbus gateway, MQTT gateway, RS485 to JSON, etc. The module features RS485 and Ethernet port(POE function is optional), uses screw terminals for power input. Rail-mount case design, small in size, easy to install. It is suitable for applications like data acquisition, IoT gateway, safety & security IoT, and intelligent instrument monitoring...

Specifications

PRODUCTRS485 TO ETH (B)RS485 TO POE ETH (B)
Product TypeSerial server, Modbus Gateway, MQTT Gateway
Basic FunctionBi-directional transparent data transmission between RS485 and Ethernet
Communication interfaceRS485 port x 1, Ethernet port x 1
Power supply9 ~ 24V DC screw terminal6 ~ 36V DC screw terminal, or PoE port
Isolation ProtectionN/CPower isolation, Signal isolation
COMMUNICATION
Ethernetcommon network portPoE network port, support IEEE 802.3af standard
10 / 100M auto-negotiation RJ45 connector, 2 KV surge protection
Serial portRS485Isolated RS485
SERIAL SPECIFICATION
Baudrate300 ~ 115200 bps
Parity bitnone, odd, even, mark, space
Data bit5 ~ 9 bits
Flow controlN/A
SOFTWARE
ProtocolETHERNET, IP, TCP, UDP, HTTP, ARP, ICMP, DHCP, DNS
Configurationhost, web browser, device management functions library
Communication methodTCP/IP direct communication, VCOM
Operating modeTCP server, TCP client (coexisting with TCP server), UDP, UDP multicast
ENVIRONMENT REQUIREMENT
Operating temperature-40℃ ~ 85℃
Storage temperature-40℃ ~ 100℃
Humidity range5% ~ 95% relative humidity
DimensionsL × W × H: 87 × 36 × 59 mm

Primary Function

Bi-Directional Transparent Data Transmission Between RS485 And Ethernet


Rail-Mount Support

Easy To Combine Multi Rail-Mounted Serial Server Together, More Freely


Modbus Gateway Support

Suitable For Modbus Gridding Upgrade, Can Be Used With 3D Configuration Software


Multi Communication Modes

Supports TCP Server / TCP Client / UDP Mode / UDP Multicast

 
MQTT/JSON To Modbus

More Flexible Conversion Between Different Protocols


When used as an MQTT gateway, the devices can upload serial data to the MQTT server by MQTT protocol through transparent transmission, supported servers including Baidu Cloud MQTT, Alibaba Cloud MQTT, China Mobile OneNet, etc. The acquired Modbus RTU or non-standard serial data can be parsed into JSON format and packaged into an MQTT data packet for uploading.

When used as a JSON data acquisition gateway, the devices can be connected to data acquisition instruments through an RS485 connection, then acquire data automatically, convert the data into JSON format, and finally post it to the server. The acquired data supports Modbus RTU 645-instrument-97 version, and 645-instrument-07 version, as well as sorts of non-standard RS485 protocols. The uploaded data format can be configured via the host, and the JSON upload protocol can be MQTT protocol, HTTP POST protocol, HTTP GET protocol, and so on.

Multi Hosts Roll-Polling Support

Different Network Devices Will Be Identified And Responded Respectively,
No More Crosstalk Issue While Communicating With Multi Network Devices


User-Defined Heartbeat/Registration Packet

Easy For Cloud Communication And Device Identification


NTP Protocol Support

Getting Network Time Info For Serial Output Or Data Upload


Multi Configuration Methods

Supports Web Browser Configuration, Obtaining Dynamic IP Via DHCP,
DNS Protocol Connected Domain Server Address


Interface Introduction
* for the power supply range, please refer to the label of the corresponding version.

Outline Dimensions

Resources & Services
Wiki: www.waveshare.com/wiki/RS485_TO_ETH_(B)
Wiki: www.waveshare.com/wiki/RS485_TO_POE_ETH_(B)

Selection Guide

 RS485 TO ETHRS485 TO ETH (B)RS485 TO POE ETH (B)RS232 TO ETH (B)RS232 TO POE ETH (B)RS232/485/422 TO POE ETH (B)RS485 TO WIFI/ETHRS232/485 TO ETH
ETHERNET
RJ45 Ethernet10/100Mbps auto-negotiation
POE-supported-supported-
WIFI interface-802.11b/g/n 2.4GHz-
UART
TypeRS485RS232RS232/485/422RS485RS232+RS485 (allows concurrent operation)
Baudrate600bps~230.4Kbps300bps ~ 115.2Kbps300bps ~ 460.8Kbps600bps~230.4Kbps
Hardware flowNOT supportedsupported
Data bit5, 6, 7, 8
Stop bit1, 2
Parity bitNone, Even, Odd, Space, Mark
INTERFACE PROTECTION
Power supplyreverse-proof, ESD protection, anti-surge
Ethernet1.5KV electromagnetic isolation
RS4852KV ESD protection, 2.2KΩ pull up/down registers2KV anti-surge600W anti-surge, lightningproof, anti-electrostatic 15KVanti-surge, lightningproof, over-current protection2KV ESD protection, 2.2KΩ pull up/down registers
Other--Power isolation, signal isolation protection-lightningproof, over-current protection
OPERATING MODE
TypeTCP Server, TCP Client, UDP Server, UDP Client, etc.
TCP Servercustomizable 1~16 Clientssupports 30 Clientssupports 24 Clientssupports 2-ch Socket, 8 Clients per ch
MISC
Featurescustomized heartbeat packets, customized registration packets, customized webpage, RFC2217-like protocol, KeepAlive, timeout auto reboot, short connection, firmware upgrade via network
-Modbus gateway, MQTT/JSON to ModbusModbus gateway, MQTT, HTTP ClientModbus gateway, Websocket (webpage to serial)
ConfigurationBuilt-in webpage, Host computer config software, Serial commands
Power supply5~7V9~24V6~36V5~36V
Operating current110mA@5V15mA@12V39mA@12V20mA@12V40mA@12V127mA@5V86.5mA@5V
Operating temp.-25~75℃ -40~85℃ 

MPN
:
23273