Description:
- Full copper 32AWG wires, 50µ gold RJ-45 contacts
- Outer diameter jacket of only 3.8mm to improve air flow in cabinet
- Snagless boots
- For channel applications
- Specifications comply to international standards
- Cables are 100% tested
- 5 Year warranty
CAT6A U/FTP slimline datacenter ethernet cables are smaller in diameter (3.8mm vs 5.9mm) than regular CAT 6A patch cords. The bending radius is lower in comparison with regular patch cords. This results in a better airflow in the cabinet.
Although, ISO/IEC and TIA standards describe the use of patch cords between 22 and 26 AWG, it is possible to use 32 AWG patch cables. This results in a higher attenuation, particularly at higher frequencies. ACT therefore recommends a shorter permanent link length than with regular 24 AWG patch cords. So this higher attenuation can be accommodated.
ACT advises a maximum bundle size of 24 cables in PoE applications. In this case the temperature of the cables, that are delivering PoE deployments, will not increase. The standard, ANSI TSB-184-A, limits the maximum temperature increasement, to less than 15 degrees Celsius above the ambient temperature, for the center cable in a bundle.
Specifications:
Brand | ACT |
Product category | CAT6A patch cables U/FTP |
Cable length | 3 m |
Connector type | RJ45 |
Connector A | RJ45 male (x1) |
Connector B | RJ45 male (x1) |
Contact plating | Gold plated |
Connector contact plating | Gold plated |
Mating cycles | 750 |
Shielding type | U/FTP |
Category | CAT6A |
Conductor material | Copper |
Wire gauge | 32 AWG |
Outer jacket | LSZH |
Impedance | 100 Ω |
Bandwidth | 500 MHz |
Cable colour | Red |
Colour number | RAL 3031 |
Min. working temperature | -20 °C |
Max.working temperature | 75 °C |
Brand item no. | DC7503 |
EAN code | 8716065442083 |