Mobile Mark LTM501 4G/LTE, WiFi & GPS MIMO Antenna

Features:

• Low profile
• Through-roof screw-mount (similar to NMO style)
• 5-cables, multi-band antenna for LTE MIMO, WiFi and GPS
• Single mounting hole; easier installation
• Field proven design; dependable link
• Mechanically sound, meets Industrial & Military specs

*This antenna has five cables - two to connect to your device's cellular connectors, one to connect to a GPS connector, and two to connect to WiFi connectors. It can be used JUST for celllular use if you like the style of this antenna but have no use for GPS or WiFi (or vice versa) - you can simply leave the unused cables bundled up out of the way.

Specifications:

• Frequency and gain:
  • Cable 1 & 2 (cellular):
    • 3db at 694-960mhz
    • 4db at 1710-2170mhz
  • Cable 3 & 4 (WiFi):
    
    • 5db at 2400-2500mhz
    • 5db at 4900-6000 mhz
  • Cable 5 (GPS):
    
    • 5db at 1575.42 +/- 2 MHz
• VSWR: 2:1 VSWR over Range
• Impedance: 50 Ohms
• Cable: 5 x 15' RF195
• Connectors: 3 x SMA/Male (cellular and GPS) and 2 x RP-SMA/Male (WiFi)
• Dimensions: 2.38" height, 5.5" diameter
• Radome material: ASA UV-Stable Plastic
• Operating temperature: -40 to +80° C
• Mounting:
  • 7/8” (22mm) diameter feed through 3/4”(19mm) long thread for up to 1/2” (12mm) thick surface
  • 8x8" metal ground plane recommended; copper or aluminum tape in an X shape can be used as a ground plane on non-metal surfaces if necessary.
• Shock & vibration: EEE1478, EN61373, MIL-810G, TIA 329.2-C
• Water Ingress: IP67

Σχετικά Αρχεία:

Datasheet