Εγγύηση:
- 2 χρόνια
UAP-AC-SHD
802.11AC Wave 2
MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave
2 AP to communicate with multiple clients at the same time - significantly
increasing multi-user throughput and overall user experience.
MU-MIMO Assuming the same conditions, a Wave 2 AP provides up to 75%
improvement* overall over a Wave 1 AP. This improvement increases wireless
performance and/or serves more clients at the same performance level.
4x4 Spatial Streams At any single time, a Wave 2 AP can communicate with the
following MU-MIMO clients:
- four 1x1 clients
- two 2x2 clients
- one 2x2 client and two 1x1 clients
- one 3x3 client and one 1x1 client
A 4x4 Wave 2 AP delivers up to 33% greater performance than a Wave 1 AP that is 3x3 in both radio bands.
Security overview:
The UniFi AC SHD AP delivers unprecedented wireless awareness and security,
including tools for real-time spectrum monitoring, airtime utilization
analytics, and intrusion detection/prevention.
Dedicated Spectral Security Radio: Using a persistent spectral scan, the
UniFi AC SHD AP constantly monitors the RF environment to check for both
potential malicious activity and the best channel for network
performance.
The dedicated security radio allows the UniFi AC SHD AP to scan for security
threats, such as malicious frames and rogue access points, while maintaining
throughput for client devices. At the same time, UniFi, in conjunction with the
UniFi AC SHD AP, analyzes and displays the wireless spectrum and airtime
utilization to allow the network admin to have unprecedented real-time
visibility into the spectral and protocol usage in the network.
Threat Management: The UniFi AC SHD AP's dedicated security radio
provides persistent threat management to act as a Wireless Intrusion Prevention
System (WIPS) and Wireless Intrusion Detection System (WIDS). Such a dedicated
radio affords frequency agility - meaning all available Wi-Fi channels are
monitored constantly for threats - not just the channels the AP is using.
Spectrum and Wi-Fi Packet Analysis: The airView® tool offers real-time
visibility into your RF spectrum. Because it uses the dedicated security radio,
it analyzes all of your available RF channels without affecting performance or
disrupting client activity. The airTime tool visualizes and analyzes how the
APs use channels in real time. The breakdown is by frame type, clients,
neighboring APs, protocols, and interference.
Spectrum view and Wi-Fi packet analysis can be done simultaneously, without
affecting stations, for a total view of the RF environment and channel
utilization.
Technical specification
Dimensions |
220 x 220 x 48.1 mm (8.66 x 8.66 x 1.89") |
Weight |
700 g (1.54 lb) |
Weight With Mounting Kits |
830 g (1.83 lb) |
Networking Interface |
(2) 10/100/1000 Ethernet Ports |
Buttons |
Reset |
Power Method |
802.3at PoE+ |
Power Supply |
UniFi Switch (PoE) |
Power Save |
Supported |
Maximum Power Consumption |
20W |
TX Power |
2.4 GHz: 6-25 dBm |
Antennas |
2.4 GHz:
(2) Dual-Port, Dual-Polarity Antennas, 6 dBi each
|
Wi-Fi Standards |
802.11
a/b/g/n/ac/ac-wave2
|
Wireless Security |
WEP,
WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
|
BSSID |
Up to
Eight per Radio
|
Mounting |
Wall/Ceiling (Kits Included) |
Operating Temperature |
-10 to 70° C (14 to 158° F) |
Operating Humidity |
5 to 95% Noncondensing |
Certifications |
CE, FCC, IC |
Advanced Traffic
Management
|
|
VLAN |
802.1Q |
Advanced QoS |
Per-User Rate Limiting |
Guest Traffic Isolation |
Supported |
WMM |
Voice,
Video, Best Effort, and Background
|
Concurrent Clients |
500+ |
Supported Data Rates
(Mbps)
|
|
802.11a |
6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11n |
6.5 Mbps
to 450 Mbps (MCS0 - MCS23, HT 20/40)
|
802.11ac |
6.5 Mbps
to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80)
|
802.11b |
1, 2, 5.5, 11 Mbps |
802.11g |
6, 9, 12, 18, 24, 36, 48, 54 Mbps |
Σχετικά Αρχεία: