MikroTik RBcAP2nD, 2dBi, 22dBm, 650MHz, 64MB, 2.4GHz, 1xEthernet, L4

Εγγύηση:

• 1 έτος

RouterBOARD cAP-2nD (ceiling Access Point) is our first 2.4GHz Dual-Chain ceiling AP. Inconspicuously designed, it blends into the environment, perfect for hospitality business like hotels, airports, shopping malls etc.

cAP-2nD supports 802.11b/g/n and can be powered by PoE. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location.

Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.

Everything is included to get you started, wall/ceiling mount, PoE injector, power adapter and even the screws and screw anchors.

Specifications

Powering

Wireless

Ethernet

Wireless specifications

Included parts

• 
  PoE injector
• 
  24V 0.38A power adapter
• 
  K-46 screw kit
• 
  Ceiling mount

Ethernet test results

1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Support & Downloads

• Brochure
• Quick Guide
• RouterOS
• RouterOS software manual
• Declaration of conformity (CE)
• Declaration of conformity (FCC 2.4GHz)