Εγγύηση:
- 1 έτος
NetMetal 5
This NetMetal version is equipped with a miniPCI-express slot, a SIM slot for 3G/4G device or additional wireless card, a high power 3x3 triple chain 802.11ac wireless and three RP-SMA connectors for external antennas
The NetMetal is a 802.11ac wireless device in a waterproof metal enclosure. Its rugged design is made to withstand the toughest conditions, but at the same time is easy to use and can be opened and closed with one hand. The solid aluminum enclosure also works as a reliable heat-sink for its high output power radio.
The NetMETAL is equipped with powerful 720Mhz CPU, 128MB RAM, one Gigabit Ethernet port, 802.11ac wireless, one SFP cage, USB, RP-SMA connectors for external antennas and RouterOS L4 license.
Suggested for High-Speed links on short distances (under 1km) Now comes in dark color.
Product specifications
Details | |
Product code | RB922UAGS-5HPacT-NM |
CPU nominal frequency | 720 MHz |
SFP DDMI | yes |
CPU core count | 1 |
Size of RAM | 128 MB |
10/100 Ethernet ports | None |
10/100/1000 Ethernet ports | 1 |
MiniPCI slots | 0 |
MiniPCI-e slots | 1 |
Wireless chip model | QCA9880-BR4A-R |
Wireless standards | 802.11a/n/ac |
Number of USB ports | 1 |
Power Jack | 0 |
802.3af support | no |
PoE out | No |
PoE in | Yes |
Supported input voltage | 8 V - 30 V |
Voltage Monitor | Yes |
CPU temperature monitor | No |
PCB temperature monitor | Yes |
Dimensions | 143x247x48mm (PCB) |
Operating System | RouterOS |
License level | 4 |
Antenna gain DBI | No |
Current Monitor | No |
CPU | QCA9557-AT4A-R |
Max Power consumption | 23W |
SFP ports | 1 |
SFP+ ports | 0 |
USB slot type | USB type A |
Number of chains | 3 |
Serial port | None |
Suggested price | $159.00 |
Wireless specifications
5 GHz | ||
TX | RX | |
6MBit/s | 33 | -96 |
54MBit/s | 29 | -81 |
MCS0 | 32 | -96 |
MCS7 | 29 | -77 |
MCS9 | 24 | -72 |
wireless parameters may be limited in software, depending on your local regulatory limitations
Included parts
Performance test results
RB922UAGS-5HPacT-NM | QCA9550 1G all port test | ||||||
Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Bridging | none (fast path) | 162.4 | 1,972.2 | 170.8 | 699.6 | 370.2 | 189.5 |
Bridging | 25 bridge filter rules | 162.4 | 1,972.2 | 111.8 | 457.9 | 99.9 | 51.1 |
Routing | none (fast path) | 162.4 | 1,972.2 | 317.4 | 1,300.1 | 370.2 | 189.5 |
Routing | 25 simple queues | 162.4 | 1,972.2 | 174.2 | 713.5 | 176.2 | 90.2 |
Routing | 25 ip filter rules | 60.2 | 731.1 | 62.8 | 257.2 | 61.8 | 31.6 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results