Εγγύηση:
- 1 έτος
DynaDish 5
The DynaDish 5 is a new 802.11ac outdoor device with an integrated 25dBi antenna. Compact in it's design, it is a simple and completely integrated product with everything you need to quickly install a reliable point to point link.
The DynaDish 5 is powered by a new 720MHz CPU from Qualcomm.
Product specifications
Details |
|
Product code |
RBDynaDishG-5HacD |
CPU nominal frequency |
720 MHz |
CPU core count |
1 |
Size of RAM |
128 MB |
10/100 Ethernet ports |
None |
10/100/1000 Ethernet ports |
1 |
MiniPCI slots |
0 |
MiniPCI-e slots |
0 |
Wireless chip model |
QCA9882-BR4A-R |
Wireless standards |
802.11a/n/ac |
Number of USB ports |
0 |
Power Jack |
0 |
PoE in |
802.3at (only unshielded cable) or Passive PoE |
Supported input voltage |
11 V - 60 V |
PoE out |
No |
Voltage Monitor |
Yes |
PCB temperature monitor |
Yes |
CPU temperature monitor |
No |
Dimensions |
Ø 404mm, height 175mm (without mount) |
Operating System |
RouterOS |
Operating temperature range |
-40C to +70C |
License level |
3 |
Antenna gain DBI |
25 |
Current Monitor |
No |
CPU |
QCA9557-AT4A-R |
Max Power consumption |
16W |
SFP ports |
0 |
SFP+ ports |
0 |
Number of chains |
2 |
Serial port |
None |
Wireless specifications
5 GHz |
||
TX |
RX |
|
6MBit/s |
31 |
-96 |
54MBit/s |
28 |
-81 |
MCS0 |
30 |
-96 |
MCS7 |
27 |
-77 |
MCS9 |
22 |
-72 |
wireless parameters may be limited in software, depending on your local regulatory limitations
Included parts
Performance test results
RBDynaDishG-5HacD |
QCA9550 1G all port test |
||||||
Mode |
Configuration |
1518 byte |
512 byte |
64 byte |
|||
kpps |
Mbps |
kpps |
Mbps |
kpps |
Mbps |
||
Bridging |
none (fast path) |
162.4 |
1,972.2 |
170.8 |
699.6 |
370.2 |
189.5 |
Bridging |
25 bridge filter rules |
162.4 |
1,972.2 |
111.8 |
457.9 |
99.9 |
51.1 |
Routing |
none (fast path) |
162.4 |
1,972.2 |
317.4 |
1,300.1 |
370.2 |
189.5 |
Routing |
25 simple queues |
162.4 |
1,972.2 |
174.2 |
713.5 |
176.2 |
90.2 |
Routing |
25 ip filter rules |
60.2 |
731.1 |
62.8 |
257.2 |
61.8 |
31.6 |
1.All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
2.Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
3.Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
4.Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Support & Downloads: