FIBARO Dimmer 2 (FGD-212 ZW5)

Product Overview:

Radio controlled light dimming module, designed to work with various types of light sources. May be connected to two-wire or three-wire configuration. Fibaro Dimmer 2 can switch or dim connected light source either through radio waves or through the wall switch connected directly to it. New Fibaro Dimmer 2 is equipped with an algorithm of smart light source detection which makes configuration easier and ensures high compatibility of the device. It features automatic overload protection switch-off and soft start function. In case of non-dimmable light sources only on/off function may be possible (in 3-wire connection).

Product Highlights:

As a dimmer, works with:

• 230V operated conventional incandescent and halogen light sources

• 12V operated ELV halogen lamps (with electronic transformers)

• 12V operated MLV halogen lamps (with ferromagnetic transformers)

• Dimmable LED lamps

• Dimmable compact fluorescent CFL tube lamps

• Supported dimmable light sources (power factor > 0.5) with minimal power of 5VA using

FIBARO Bypass 2 (depending on the type of load)

As a switch, works with:

• Compact fluorescent lamps

• LED lamps

• Supported light sources (power factor > 0.5) with minimal power of 5VA using

FIBARO Bypass 2 (depending on the type of load)

Technical Data:

• Power source 220-240V~ 50Hz

• Output power: 50-250W (resistive load)

• Overcurrent protection: required external 10A circuit breaker

• Power consumption: <1.3W

• Ambient temperature: 0oC - 35oC

• To be mounted in standard wall switch boxes Ø ≥ 50mm

• Radio protocol: Z-Wave Plus

• Radio frequency: 868.42 MHz or 869.85 MHz EU; 908.4 MHz or 916 MHz US; 921.4 MHz or 919.8 MHz ANZ; 869 MHz RU;

• Outside dimensions (L x W x H): 42.5 x 38.25 x 20.3mm

• Compliant with EU directives: RoHS 2011/65/EU, LVD 2006/95/EC, EMC 2004/108/EC, R&TTE 1999/5/EC

Product features:

• Compatible with any Z-Wave and Z-Wave+ controller

• Implemented algorithm of smart light source detection

• Active power and energy metering functionality

• Works with various types of switches – momentary, toggle, three-way, etc.

• Soft-start function

• LED diode signaling inclusion status, calibration status and MENU levels

• Built-in Z-Wave range tester

• Dimmer 2 automatically senses faults in wiring, reporting excess temperature, burnt bulb, overvoltage and overload

• Advanced configuration options