Product Description

The M-DA6.10.1-232 is ballast dimming and relay output unit, which is capable of controlling multiple load types via its 6 output channels. The module comes with a dedicated manual control feature, making instant system manipulation possible.
Selling points of M-DA6.10.1-232

1. Dual outputs

The M-DA6.10.1-232 combines a 10A switching relay output, with a 0-10v ballast dimmer. Due to this unique combination of functions, the module is perfectly suited to ballast control applications.

2. Load types

Each relay channel from the M-DA6.10.1-232 is capable of being connected to dimmable ballasts and powering them on or off. The dimming and control of both 0-10V LED lights, and 0-10V fluorescents is possible.

3. Brightness value

Exact light intensity requirements can be met with the M-DA6.10.1-232, as the light can be increased or decreased in incremental stages. A user can choose between 1% brightness at 0.1volts, and 100% brightness at 10V.

4. Staircase lighting

When the module is utilized to control staircase lighting, the run time of the dimmer is able to be modified. This enables the lighting to match the average speed at which a person can ascend or descend the staircase.

5. Scene Recovery

When the dimmer has been powered off, it is able to automatically restore the last scene used when it is powered on again. This gives the user a system that remembers their previous scene, and requires no further control or modification.

● 6 Channel 0-10V dimming and maximum 10A relay output for every channel. also can manually switch.
● The switch functions : Statistical total ON time, Status respone ,Status recovery, Upper limit , Lower limit, Staircase light , Scene control , Scene dimming, Sequence control , Threshold switch, Heating actuator( PWM)

Datasheet KNX Ballast 6CH 10A Dimmer

Electrical Parameters:

-Working Voltage :21-30VDC
-Communication: KNX/EIB
-Dynamic Current:<15mA
-Static Current: <5mA
-Dimming Output:DC0-10V, 20mA per channel
-Channel Current: 10A/CH
-Shut off way: Pulsed with the lock relay shut off
-Relay working Voltage:220~250V AC(50/60Hz)
-User Controls: Manual operation for each channel, KNX LED & button programming
-KNX Terminals: KNX Bus Terminal-(Red /Black) 0.6-0.8mm Diameter Single Core
-Electrical life time: >100000
-Mechanical life time: >1000000

Approved:

-CE, RoHS
-KNX

Product Information:

-Dimensions: 90 x 144 x 66 (mm)
-Housing Material: Nylon
-Installation: Work with panel, wall-box