Product Description
The M-FCU01.10 module has two selectable functions, the first being FCU control, and the second being floor heating control. In total the module has 7 channels, and is able to control fan speed, mode, air-conditioner temperature, and floor heating/cooling.
Multifunctional
The unit can control both fan coil units, and underfloor heating. These dual control options provide support for the two commonest requests from a HVAC controller, coupled with this the controller is able to provide precise management to ensure the exact needs of the user are met.
Comfortable environment
This module is suitable for any residential, hospitality, or commercial building automation solution. With complete control of fan speed, and cooling/heating, users can enjoy a comfortable indoor experience without needing to trouble themselves over indoor environmental conditions.
Multiple operation modes
Due to the multiple operation modes present on the M-FCU01.10, the HVAC control can meet various modes or requests which van be set by the user. Common modes for this unit are comfort mode, standby mode, night mode, and upper and lower temperature limits. Coupled with this the fan speed has three settings high, medium, and low.
Extended capability
The temperature sensor detection ability of the HVAC controller can be extended with up to 7 extra digital temperature sensors. This enables the module to calculate a more precise average temperature, so the HVAC solutions work more efficiently.
Dual outputs
The M-FCU01.10 has dual outputs enabling both a 10A relay output to enable switching, and a DC0-10v output that is able to control fan speed or valves. These outputs give a user added flexibility and adaptability during installation.
M/FCU01.10.1 module combine FCU control with floor heating control, it has high-medium-low fan speed and cooling and heating control if selected FCU function in ETS , it has 7 channels floor heating control if selected by ETS, supports 7 digital temperature sensors.
- The FCU controller and 7 channels floor heating control
- 7 channels digital temperature sensor.
- Can be configured for 5 channels relay output and 2 channels DC0-10V.
- Fan speed and valve status report
- 2 channels DC 0-10V for FAN speed or 0-10V valves
Electrical Parameters:
-Control Interface: KNX/EIB
-Dynamic Current: <20mA
-Static current: <5mA
-KNX Terminal: KNX Bus Terminal–(Red /Grey)0.6-0.8mm Diameter Single Core
-Temperature sensor: two wires digital sensor (18B20)
-Fan speed: High, Medium, Low
-HVAC working mode: Heating, Cooling
-HVAC operation mode: Standby mode, Comfort mode, Night mode, Frost protection
-Operation times: >1000000
-Outputs: 5 channel 10A relay outputs;2 channel 0-10V DC outputs (10mA /channel)
-Output Terminals:Line In, Line Out for each channel 2.5-4mm2
Approved:
-CE, RoHS
-KNX
Product Information:
-Dimensions: 90 x 72 x 66(mm)
-Housing Material: Flame Retardant Nylon
-Installation: 35mm Din rail installation