16CH 10A Relay Module: Main Function | Statistical functions for running time of Channel | Channel status response 1-On/off status can be set when Power-Down or Power up | Timer Function | Scene Control | Threshold Function | Curtain Control function | Logic Function: And, Or, Xor, Gate | Heating
Function: PWM control output

DMX Recorder with KNX association protocol. Make record and play back DMX program from the KNX software or KNX wall panels. recording time up to 4 hours;，supports the setting and play back of the DMX scenes.

12CH 16A Relay Module: Main Function | Statistical functions for running time of Channel | Channel status response 1-On/off status can be set when Power-Down or Powerup | Timer Function | Scene Control | Threshold Function | CurtainControl function | Logic Function: And, Or, Xor, Gate | Heating Function: PWM control output

Leading edge and Trailing Edge Technology Dimmers complying with European safety standards and KNX association protocol.Trailing Edge Technology Dimmers Short circuit protection, over load protection,over Heat protection.

Edge Technology Dimmers complying with European safety standards and KNX association protocol.Trailing Edge Technology Dimmers Short circuit protection, over load protection,over Heat protection.

16CH 16A Relay Module: Main Function | Statistical functions for running time of Channel | Channel status response 1-On/off status can be set when Power-Down or Power up | Timer Function | Scene Control | Threshold Function | Curtain Control function | Logic Function: And, Or, Xor, Gate | Heating
Function: PWM control output

HDL KNX Line Coupler, DIN-Rail Mount, to be used as coupler and Repeater(to amplify the signal), if as a line coupler, it can be linked with other line or backbone line, a separate power supply include a choke is required for each new line and each line will be electrically isolated, the line coupler can filter telegrams and permit pass or black them to other adjacent line.

HDL KNX IP Rounter, It can be used as line‐ or backbone coupler and provides a data connection between the upper KNX net/IP line (main line or backbone) and the lower TP KNX bus line (sub line). It also provides with the tunnelling protocol a connection point for ETS to enable commissioning and monitoring.

eibPort device connects your building control with Ethernet and Home-Entertainment. Thereby he used as desired different techniques. Besides KNX / Powernet KNX TP and the EnOcean radio system or an optional GSM radio connection is available. Through the network interface, it is e.g. possible to switch a beamer or start the preferred mp3 playlist by using a pushbutton. Furthermore, the eibPort provides an excellent visualization and automation of the whole building control.