Product Description

The HDL KNX M/R4.10.1 relay module can supply 4 channels with a current of 10A. This module is able to support diversified devices, and can be applied to any solution which requires switching control.

Zero power consumption

Using a high performance magnetic launching relay the M/R4.10.1 does not consume any power. This is because the relay is only trigged by a DC pulse, a constant DC power source is unneeded.

Reliable

Each of the four channels that the module outputs to support 10A. Due to the inclusion of a 16A magnetic relay, the module has a guaranteed stable performance, and lower maintenance requirements. This built in redundancy ensures the module has a long and efficient service life.

Multiple loads

Thanks to the built in 16A magnetic relay, the module can handle a 500A current surge. This enables the module to switch multiple loads from a wide range of sources. From lighting, heating, motors, transformers, valves and power sockets, this module unifies and streamlines control into one simple to install and operate package.

Heating function

Pulse Wave Modulation (PWM) allows heating devices to be efficiently managed, as a desired temperature can be easily maintained. This makes the HDL KNX M/R4.10.1 ideal for situations where precise temperature control is needed.

Light Protection delay

Each of the modules 4 channels feature a power on protection delay time, this delay time is adjustable from 0-60 minutes. This delay protection safeguards any lights that are connected to the module, ensuring they have a maximised life expectancy and provide hassle free service.


● The switch actuators can drive for 4 channels loads.
● The maximum 10A on every output channel. Also, it has manual buttons.
● The module functions: Statistical ON time, Status response, Status Recovery, Staircase light, Flashing, ON/OFF delay, Protection delay, Scene Control, Threshold Function, Curtain Control and so on.
● Logic function: AND, OR, XOR, Gate
● Heating function: PWM(1bit/1byte) control output


Datasheet KNX 10A Relay Module 4CH


Performance parameter:

-Working Voltage: 21~30VDC
-Communication: KNX/EIB
-Dynamic current: <15mA
-KNX terminals: KNX Bus Terminal – (Red /Grey) 0.6-0.8mm Diameter Single Core
-Rated switch voltage: 250V AC Supply
-Rated switch current: 10A lighting load, Max inrush 500A
-Operation times: >1000000
-Output Terminals: Line In, Line Out for each channel 2.5-4mm2
-Output Current: 4CH/10A
-Capacity: <300μF

Approve

CE
KNX

Product Information:

-Dimensions: 90 x 72 x 66 (mm)
-Housing Material: Flame retardant nylon