HDL 16A Relay Module 12CH (HDL-M/R12.16.1)

433,00
(536,92 με ΦΠΑ)
058.0530
Άμεση
+
Προσθήκη στα αγαπημένα

Product Description

The M/R12.16.1 KNX relay module can supply 12 channels with a current of 16A.Manual channel control is enabled via the modules on-board buttons, this module is able to support diversified devices, and can be applied in to any solution which requires switching control.

Zero power consumption

Using a high performance magnetic launching relay the M/R12.16.1does not consume any power. This is because the relay is only triggered by a DC pulse; a constant DC power source is unneeded.

Reliable and safety

Each of the 12 channels that the module outputs to support 16A. Due to the inclusion of a 50A magnetic relay, the module has a guaranteed stable performance, and lower maintenance requirements. This built in redundancy ensures the module has a long and efficient service life.

Multiple loads

Thanks to the built in 50A magnetic relay, the module can handle a 500A current surge. This enables the module to switch multiple loads from a wide range of sources. From lighting, heating, motors, transformers, valves and power sockets, this module unifies and streamlines control into one simple to install and operate package.

Heating function

Pulse Wave Modulation (PWM) allows heating devices to be efficiently managed, as a desired temperature can be easily maintained. This makes the HDL KNX M/R12.16.1 ideal for situations where precise temperature control is needed.

Manual control

Each channel has full manual control, and independent channel testing. This enables onsite switching of lights and dimming control even if the module is powered off.

Light Protection delay

Each of the modules 12 channels feature a power on protection delay time, this delay time is adjustable from 0-60 minutes. This delay protection safeguards any lights that are connected to the module, ensuring they have a maximised life expectancy and provide hassle free service.


● The switch Actuators can drive for 12 channels loads.
● The maximum 16 A on every output channel, also can manually operation.
● The module functions : Statistical ON time ,Status response, Status Recovery, Staircase light, Flashing ,ON/OFF delay, Protection delay ,Scene Control, Threshold Function,Curtain Control and so on.
● Logic Function: AND, OR, XOR, Gate
● Heating Function: PWM(1bit/1byte) control output


Datasheet KNX 16A Relay Module 12CH

Performance parameter:

-Working Voltage: 21~30VDC
-Communication: KNX/EIB
-Dynamic current: <15mA
-KNX terminals: KNX Bus Terminal-(Red /Grey) 0.6-0.8mm Diameter Single Core
-Rated switch voltage: 250V AC/440VAC Supply
-Rated switch current: 16A lighting load, Max inrush 500A
-Operation times: >1000000
-Output Terminals: Line In, Line Out for each channel 2.5-4mm2
-Output Current: 12CH/16A
-Capacity: <300μF

Approve:

CE
KNX

Product Information:

-Dimensions: 90 x 216 x 66 (mm)
-Housing Material: Flame retardant nylon

MPN
:
HDL-M/R12.16.1
EAN
:
6951588842053