Product Description

As a dedicated HDL KNX/EIB power supply module, the M/P 960.1 is specially designed to provide a maximum of 960mA at 30 volts. This ensures that the optimum power supply is delivered to the HDL KNX/EIB, enabling it to function faultlessly.

LED indication

Dual LED indicators show at a glance if the module is operating normally, or if it has been overloaded. This enables a user to instantly identify the status of the unit, without resorting to diagnostic software. A manual reset button is included in the system to aid installation and troubleshooting.

Protection

The module is protected through the inclusion of short circuit protection, and overload protection. These safeguards ensure operational efficiency, and guarantee a long trouble free service life.

  • KNX Power Supply with 960mA current output .
  • Overload protection, short circuit protection.
  • Keep pressing the reset button for 2 seconds to reset the device.

Datasheet KNX Power Supply 960mA

Electrical Parameters:

-Working Voltage: AC110V/AC230V 50/60Hz
-Bus Communication: KNX/EIB
-KNX/EIB voltage output: DC 30V
-Supply Current: 960mA
-Power loss: < 4W
-KNX Terminals: (Red /Grey) 0.6 – 0.8mm Diameter Single Core
-Power on time: <1s
-User controls: Button reset EIB
-Green LED: Output normal
-Red LED: Overload (I>Imax)

Approved:

-CE
-KNX

Product Information:

-Dimensions: 90 x 144 x 64(mm)
-Housing Material: Nylon(PA66)