Wireless signal repeater EWR2
Wireless device EWR2 expands the wireless signal range between Eldes alarm systems ESIM364, EPIR3 and wireless devices
User Manual EWR2
Wireless device EWR2 expands the wireless signal range between Eldes alarm systems ESIM364, EPIR3 and wireless devices
Radio System Installation Signal Penetration Manual
Wireless device EWR2 expands the wireless signal range between Eldes alarm systems ESIM364, EPIR3 and wireless devices.
Wireless repeater EWR2 supports up to 32 wireless accessories, such as sirens, smoke detectors, door sensors and other.
EWR2 comes with LED indicator intended for successful data transmission to the alarm system confirmation.
A set of EWR2 includes two antennas, internal and external that switch automatically. Repeater is also equipped with the battery fault/wrong placement LED indication and external power connection LED.
It is easy to bind EWR2 by using Eldes Configuration Tool or by sending SMS message to alarm system. Up to 4 EWR2 devices can be connected to Eldes alarm systems.
Power supply |
DC 9-15V; 300mA, if no additional devices are connected |
Backup battery |
3x rechargeable NiMH 1.2V AA >2000mAh |
Battery operation time |
up to 48h (depending on working conditions) |
Number of zones |
2 |
Wireless transmitter-receiver frequency |
868 Mhz |
Wireless communication range |
Up to 30 meters in premises; up to 150 meters in open areas |
Tampers |
2 |
Range of operating temperatures |
-20…+55ºC |
Humidity |
0-90% RH @ 0… +40 °C (non-condensing) |
Compatible with alarm systems |
ELDES wireless |
Dimensions |
94×137×25mm |