Fanvil PA2 SIP Video Intercom & Paging Gateway

Περιγραφή:

Fanvil PA2 is a SIP video intercom & paging device for industry application. The media stream transmission adopts standard IP/RTP/RTSP protocol & inherits the advantages of stability & sound quality of Fanvil's experience on IP Phones. It is perfectly compatible with all the current SIP IPPBX /IMS platforms, such as Asterisk, Broadsoft, 3CX, Elastix, etc. Supports various functions & interfaces like intercom, broadcast, video , security & recording, easily adopting to different application environments. Fanvil PA2 offers you an easy DIY video intercom & paging equipment installation, making it the best choice for everyone.

Key Features & Benefits:

• Small & exquisite, can be embedded in the internal installation
• Emergency call button interface, active call
• Interact with IPC camera, you can make a video phone call
• NVR video recording, standard RJ45 interface
• Recording output, 3.5mm standard audio interface
• 10W-30W adaptive output power
• System online management & upgrade
• 1 Year Warranty

Intercom:

• 2 SIP lines, supporting SIP 2.0 (RFC3261) & related RFC
• 2 lines RTSP support
• Voice broadcast IP address
• Button or remote volume adjustment
• Switch signal input & output
• Talkback recording output
• Handsfree talking
• Default auto answer
• Dynamic multicast function
• Supports DC or POE power supply
• Function key interface support
• Monophonic active speakers support 
• Network time synchronization
• Action URL/Active URI remote control

Audio:

• Narrowband speech coding: G.711a / u,G.723.1, G.726-32K, G.729AB
• Broadband speech coding: G.722
• Half Duplex Echo Cancellation (AEC)
• DTMF: In-band, out-of-band DTMF (RFC2833) / SIP Info

Networking / Protocols:

• PoE (802.3af)
• Primary & secondary DNS servers are supported
• VLAN
• SNTP client
• VPN L2TP / PPTP / IPSec
• SRTP
• HTTP / HTTPS web pages
• Qos: 802.1p / q, DSCP
• MD5 authentication
• Web Filter
• DHCP / static / PPPoE
• STUN

Physical Specs:

• 2 RJ45 interface:

- Yellow: WAN port 10 / 100M adaptive, support POE - PoE: 802.3af (Class 3: 6.49 ~ 12.95W) - Black: LAN port (Only connected to the original camera) - Cable: Super 5 lines or better

• 1 blue indicator (SIP status & network status)
• 2 volume plus or minus key
• 1 restore factory settings key
• 1 recording output interface: 3.5mm standard audio interface 15Ohm impedance
• 1 ground screw
• 1 way passive speaker interface: οutput power: 4Ω, POE / 10W, 12V / 10W,18V / 20W, 24V / 30W; related to supply voltage
• Wire diameter: 18 AWG or larger diameter, Interface: pluggable terminal block
• 1 headset speaker： Output: 32Ohm 1.2V, Interface: pluggable terminal block
• 1 DSS key interface (4 lines): Indicator: Output 5.0V 5mA, Interface: pluggable terminal block
• 1 way microphone input interface: 

- Recommendation: Use an electret condenser microphone - Sensitivity: -38dB, Impedance 2.2K - Ohm bias voltage 2.2V, interface: pluggable terminal block

• 1 short circuit input & output interface (built-in relay): Relay: MAX DC30V/1A, AC125V/0.5A, interface: pluggable terminal block
• 2 parallel power input interface:

- 12V-24V / 2A DC 1 road for the 5.5mm - DC power seat 1 road way 2Pin - pluggable terminal block

• Standby power consumption: DC12V 1.32W / POE 1.78W
• Housing material: aluminum alloy shell
• Installation: Indoor installation
• Operating temperature: -30~70℃
• Storage temperature: -40~70℃
• Relative humidity: 10-95>#/li###
• Equipment size: 113x83x28mm
• Packing size: 138x108x77mm
• Equipment weight: 250g