iCOM IC-F2000S
Compact, Slim Dimensions IP67Waterproofing and Full of Useful Features
IP67 Waterproof and Dust-tight Protection
The IC-F1000 series has a 24.5mm slim depth with IP67 waterproof casing. The transceiver can withstand 1m depth of water for 30 minutes. Its dust-tight construction prevents the ingress of powder dust, sand, mud and other objects.
Enhanced Emergency with Built-in Motion Sensor
With a built-in motion sensor, the ICF1000 series can detect its position, state of motion and non-motion and can send an emergency signal. The motion function detects if the transceiver is moving or shaking, for example, during a chase. The lone worker and man down functions are programmable.
Easy to Hear in a Noisy Environment
The large 36mm speaker of the transceiver provides clear companded 800 mW* audio. The built-in BTL amplifier doubles the audio output power and delivers loud and intelligible voice to a radio operator working in noisy environments.
* Typical with internal speaker
Inversion Voice Scrambler
The built-in inversion voice scrambler provides secure conversation. Up to 16 codes are selectable.
14 Hours of Operating Time with Supplied Waterproof Battery
The supplied waterproof Li-Ion battery pack, BP-279 (1570mAh typ.), provides 14 hours* of operating time.
* Tx:Rx:Standby=5:5:90. Power save function ON.
Quiet Stand-by and More
The IC-F1000 series has built-in 2-Tone, 5-Tone, CTCSS and DTCS signaling capabilities for group communication and selective calling..
MDC 1200 Compatible
The following MDC features are programmable.
- PTT ID
- Emergency (No ACK transmission)
- Radio check (RX only)
- Stun/Revive (RX only)
- Transmit status messages (LCD types only)
- 100 alias table (LCD types only)
Channel Announcement
When you rotate the channel knob, the radio announces the channel number.
Convenient for making radio adjustments without having to look at the radio.
Other Features
- 8 DTMF autodial memories
- BIIS PTT ID and emergency call
- “Shift key” function increases number of programmable key assignments
- Surveillance function
- Escalating alarm
Supplied accessories
- Battery pack, BP-279
- Desktop charger, BC-213
- AC adapter, BC-123S
- Belt clip, MB-133
- Antenna
General
IC-F1000/S/T | IC-F2000/S/T | |||
|---|---|---|---|---|
| Frequency coverage (Varies according to version) | USA | 136–174MHz | 400–470MHz 450–512MHz | |
| EXP | 335–380MHz 400–470MHz 450–520MHz | |||
| Number of channels | IC-F1000 IC-F2000 | 16 channels | ||
| IC-F1000T/S IC-F2000T/S | 128 channels | |||
| Type of emission | 16K0F3E*/11K0F3E | |||
| Channel spacing | 12.5/25kHz | |||
| Power supply requirement | 7.5V DC nominal | |||
| Current drain | Tx High | 1.3A | ||
| Rx | Stand-by | 77mA | 80mA | |
| Max. audio (Internal SP) | 330mA | 300mA | ||
| Antenna impedance | 50Ω | |||
| Operating temperature range (Radio specification) | –30°C to +60°C; –22°F to +140°F | |||
| Dimensions (projections not included; W×H×D) | 52.2×111.8×24.5mm 2.06×4.4×0.96 in (With BP-279) | |||
| Weight (approx.) | 240g 8.47oz (With BP-279) | |||
Transmitter
IC-F1000/S/T | IC-F2000/S/T | ||
|---|---|---|---|
| RF output power | 5W, 2W, 1W (Hi, L2, L1) | 4W, 2W, 1W (Hi, L2, L1) | |
| Max. frequency deviation (W/N) | ± 5.0kHz/±2.5kHz | ||
| Spurious emissions | 70dB min. | ||
| Frequency stability | ±2.5ppm | ||
| Audio harmonic distortion (W/N) | .0%/1.5% typ. (AF 1kHz 40% deviation) | ||
| FM Hum and Noise (W/N) | 46/40dB typ. | ||
| Ext. microphone connector | 3-conductor 2.5 (d) mm (1/10ʺ)/2.2kΩ | ||
Receiver
IC-F1000/S/T | IC-F2000/S/T | ||
|---|---|---|---|
| Sensitivity (at 12dB SINAD) | 0.25μV typ. | ||
| Adjacent channel selectivity (W/N) | 76/53dB typ. (TIA-603D) 78/71dB typ. (TIA-603A) | 73/56dB typ. (TIA-603D) 74/64dB typ. (TIA-603A) | |
| Spurious response rejection | 70dB min. | ||
| Intermodulation rejection | 74dB typ. | 73dB typ. | |
| Hum and noise (W/N) | 51/45dB typ. | 49/43dB typ. | |
| AF output power (at 5% distortion) | Internal SP | 800mW typ.(With 12Ω load) | |
| External SP | 400mW typ.(With 8Ω load) | ||
| Ext. speaker connector | 2-conductor 3.5 (d) mm (1⁄8ʺ)/8Ω | ||
Measurements made in accordance with TIA-603 (USA/EXP).
All stated specifications are subject to change without notice or obligation.
FUNCTION COMPARISON AND INTERNAL UNIT OPTIONS
IC-F1000/S/T IC-F2000/S/T | ||
|---|---|---|
| Number of option slots | - | |
| CTCSS/ DTCS | encoder | Available |
| decoder | Available | |
| 2-Tone | encoder | Available |
| decoder | Available | |
| 5-Tone | encoder | Available |
| decoder | Available | |
| DTMF autodial | Available | |
| DTMF decoder | - | |
| Voice Scrambler | Inversion | Available |
| Non-rolling | - | |
| Rolling | - | |
| APCO P25 digital | - | |
| 6.25kHz digital | - | |
| MDC 1200 | Available (Limited functions) | |
| Motion function | Available | |
| Lone worker function | Available | |
| Man down function | Available | |
| Intrinsically safe | - | |
| Voice announcement | Available | |
| Audio compander | Available | |
| GPS receiver | - | |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 G Method, Proc. |
|---|---|
| Low Pressure Storage | 500.5 I |
| Low Pressure Operation | 500.5 II |
| High Temperature Storage | 501.5 I |
| High Temperature Operation | 501.5 II |
| Low Temperature Storage | 502.5 I |
| Low Temperature Operation | 502.5 II |
| Temperature Shock | 503.5 I-C |
| Solar Radiation | 505.5 I |
| Rain Blowing | 506.5 I |
| Rain Drip | 506.5 III |
| Humidity Induced | 507.5 II |
| Salt Fog | 509.5 |
| Dust Blowing | 510.5 I |
| Immersion | 512.5 I |
| Vibration | 514.6 I |
| Shock Functional | 516.6 I |
| Shock Transit Drop | 516.6 IV |
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
| Ingress Protection Standard (IC-F1000/T/S, IC-F2000/T/S & HM-168LWP) | |
|---|---|
| Dust & Water | IP67 (Dust-tight and waterproof protection) |
All stated specifications are subject to change without notice or obligation.
