iCOM IC-F3162T

508,08
(630,02 inc tax)
Out of stock
Add to Wishlist

MIL-STD 810MIL-STD 810

DIGITAL*/ANALOG MULTI-MODE PROFESSIONAL

* Optional UT-126H required.

512 memory channels with 128 zones

The 512 memory channel capacity with 128 zones allows you to divide and store a variety of channel groupings for versatile and efficient fleet management.

IDAS digital mode ready

The NXDN CAI-based IDAS digital mode is available with the optional UT-126H digital unit.

Dot matrix, multi-function LCD

The IC-F3162 series has a large dot matrix display to show information with high resolution characters. The display setting is programmable to show one line and 12 characters, or two lines and 24 characters. The bottom row shows assigned functions to the [P0] to [P3] buttons.

Voting operation

The voting mode scanning detects the signal strength level of repeater stations and automatically selects the strongest station, useful for roaming between 2 or more repeater sites. Once you program the voting mode to a memory zone, you can easily start voting mode operation by changing the zone setting.

Loud audio output with BTL amp

The IC-F3162 series employs a BTL amplifier that increases the audio output and the built-in audio compander provides clear, low noise communications.

Other features

  • Built-in LTR™ trunking and MDC 1200 capability* (* Depending on version)
  • Built-in inversion type voice scrambler and optional UT-109R and UT-110R for higher security
    Inversion type voice scrambler is not compatible with UT-109R/UT-110R voice scrambler.
  • The mode independent setting automatically selects the scanning list, according to the operating channel
  • Nuisance delete
  • IP55 dust-protection and water jet resistance
  • Optional man down unit, UT-124R and lone worker function
    and more...

General

IC-F3162T/S

IC-F4162T/S

Frequency coverage
(Varies according to version)
136–174 MHz
400–470 MHz
Number of channels
512 ch/128 zones
Channel spacing
(Varies according to version)
25/20/12.5kHz
6.25kHz (option)
Type of emission
16K0F3E, 14K0F3E
8K50F3E,
4K00F1E/D* (* Digital)
Current drainTx High1.5A1.8A
RxStand-by100mA100mA
Max. audio
600mA
Dimensions
(projections not included; W×H×D)
53×136×38.5 mm
Weight (approx.)
340g (with BP-232N)

TRANSMITTER

IC-F3162T/S

IC-F4162T/S

RF output power
5W
Spurious emissions
0.25μW (≦1GHz)
Frequency stability
±1.0ppm
Audio harmonic distortion
3% typical
40% deviation

RECEIVER

IC-F3162T/S

IC-F4162T/S

Sensitivity at 20dB SINAD-4dBµV (typ.)
Adjacent channel selectivity (W/M/N)
75/75/68dB (typ.)
Spurious response rejection
70dB (min.)
Intermodulation rejection
67dB (typ.)
AF output power
(at 5% distortion with an 8Ω load)
500mW (typ.)

FUNCTION COMPARISON AND INTERNAL UNIT OPTIONS

IC-F3162T/S IC-F4162T/S

Number of option slots2*
CTCSS/ DTCSencoderAvailable
decoderAvailable
2-ToneencoderAvailable
decoderAvailable
5-ToneencoderAvailable
decoderAvailable
DTMF autodialAvailable
DTMF decoderAvailable
Voice Scrambler
(Analogue)
InversionAvailable
Non-rollingUT-109R
RollingUT-110R
IDAS dPMRTier 2 Mode1/2-
Tier 2 Mode 3-
IDAS NXDNConventionalUT-126H
Single-site type
D trunking
UT-126H
Multi-site type D
trunking
UT-126H
MPT 1327-
BIIS 1200Available
MDC 1200Available
LTR™ trunkingAvailable
Man Down functionUT-124R
Intrinsically safe-
Vibration alert-
Voice recorder-
* One for UT-126H digital unit and one for another option board.

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

StandardMIL-810 F
Method, Proc.
Low Pressure Storage
500.4 I
Low Pressure Operation
500.4 II
High Temperature Storage
501.4 I
High Temperature Operation
501.4 II
Low Temperature Storage
502.4 I
Low Temperature Operation
502.4 II
Temperature Shock
503.4 I
Solar Radiation
505.4 I
Rain Blowing
506.4 I
Rain Drip
506.4 III
Humidity Induced
507.4
Salt Fog
509.4
Dust Blowing
510.4 I
Vibration
514.5 I
Shock Functional
516.5 I
Shock Transit Drop
516.5 IV
Also meets equivalent MIL-STD-810 -C, -D and -E.

Ingress Protection Standards
Dust & Water
IP55 (Dust-protection and water jet resistance)
MPN
:
IC-F3162T