iCOM IC-F3262DT#39 (NXDN)
Advanced IDAS™ Digital Handheld with Built-in GPS and Waterproof Protection
IP67 Waterproof & Dustproof Protection
The IC-F3262D series provides protection against dust and water that is equivalent to IP67. The radio can withstand 1m depth of water for 30 minutes.
Man Down and Lone Worker Functions for Emergency Call
The man down function* automatically sends an emergency signal when the transceiver is left in a horizontal position. The lone worker function also can transmit an emergency signal when the radio is not operated for a preset period. These emergency signals can be sent with GPS position data* to alert your co-workers or dispatch of any potential trouble.
* Depending on version.800mW (typ.) Audio Output Power
The built-in BTL amplifier doubles the audio output power and the large 40mm speaker delivers loud 800mW (typ.) audio to receive all calls under noisy environments.
Built-in GPS Receiver*
Your current position data can be attached to a voice or data (SDM, status or emergency signal) transmission and can be sent to dispatch stations*.
| * | Depending on version. |
| * | To graphically show the received position data, an external PC application is required. |
14-pin Accessory Connector
The new 14-pin accessory connector enhances audio output capabilities with the built-in BTL amplifier. The optional HM-184 speakermicrophone has a 1000mW (typ.) audio output for loud and clear communications.
Large Full Dot-Matrix LCD
Using a large full dot-matrix LCD (32 × 18mm), the IC-F3262D series shows two lines of easy-to-read text messages. The bottom row shows assigned functions to the [P0] to [P3] buttons.
Long Lasting Battery Life
GPS type |
Operating Time |
|---|---|
| Built-in GPS type | 10.5 hours (approx.) |
| Non GPS type | 12 hours (approx.) |
dPMR™ Features
The IC-F3262D series* meets dPMR standards (TS 102 658) and provides dPMR Tier 2 Mode 1/2/3 operation. The following dPMR features are programmable.
- Individual/group call
- All group call
- Emergency
- Call log
- Status message
- SDM (Short Data Message)
- GPS
- Stun, kill and revive
- Digital voice scrambler
- Transparent data mode
Call Setup and Clear Down
The "Call setup and clear down" which is used in 5-Tone or BIIS signaling in analogue radios is implemented in the dPMR system. The IC-F3262D series confirms availability of the destination radio before you talk. 5-Tone or BIIS users can introduce dPMR without hesitation and avoid a new learning curve with these radios.
Transparent Data Modem Function
When IC-F3262D series is connected to a PC or other external equipment, the transparent data modem function allows communication in a 6.25kHz channel. It can be used for remote telemetry system control or data applications.
Built-in Voice Scrambler
The built-in inversion voice scrambler* provides secure conversation in analogue mode. When using IDAS digital mode, the digital voice scrambler provides a 15-bit key (about 32,000 codes) as standard.
* Inversion voice scrambler is not compatible with UT-109R/UT-110R voice scrambler.Status Messages
The IC-F3262D series has 32 programmable status messages. The status messages can be used as special functions to control the radio such as ambience listening (Auto TX), radio stun/kill/revive and GPS position reporting/request.
Other features
- 512 memory channels with 128 zones
- 5W output power both in VHF and UHF
- Built-in 2-Tone, 5-Tone and BIIS 1200*
- CTCSS/DTCS encoder/decoder*
- MIL-STD 810 G rugged construction
- 8 DTMF autodial memories
- Tactical group function
- Busy channel lockout, repeater lockout
- Power on password
- Time-out timer
- Talk around function
- Low battery alert
- Escalating alarm
- Surveillance function
Supplied accessories (May differ according to version)
- Battery pack, BP-232WP
- Belt clip, MB-94R
- Antenna
- IDAS and IDAS logo are trademarks of Icom Incorporated.
- dPMR and the dPMR logo are trademarks of the dPMR MoU Association.
- NXDN is a trademark of Icom Incorporated and JVC KENWOOD Corporation.
- LTR is a trademark of E.F. Johnson Technologies Inc.
- All other trademarks are the properties of their respective holders.
General
IC-F3262DT/DS |
IC-F4262DT/DS |
|||
|---|---|---|---|---|
| Frequency coverage |
136–174 MHz
|
400–470 MHz
|
||
| Number of channels |
512 channels/128 zones
|
|||
| Channel spacing |
25/20/12.5/6.25kHz
|
|||
| Type of emission |
16K0F3E/14K0F3E/8K50F3E/4K00F1E/F1D
|
|||
| Current drain (approx.) |
Tx High (at 5W) |
1.7A
|
1.8A
|
|
| Rx | Rated output |
550mA
|
||
| Standby |
160mA
|
|||
| Dimensions (W×H×D) (projections not included) |
53.5×142.7×39.5 mm
(With BP-232WP) |
|||
| Weight (approx.) |
410g
(with BP-232WP, MB-94R & FA-SC55V) |
400g
(with BP-232WP, MB-94R & FA-SC57U) |
||
TRANSMITTER
IC-F3262DT/DS | IC-F4262DT/DS | ||
|---|---|---|---|
| RF output power (at 7.5V DC) | 5W, 2W, 1W (Hi, L2, L1) | ||
| Spurious emissions | 0.25μW (≤1GHz), 1.0μW (>1GHz) | ||
| Frequency stability | ±1.0ppm
| ||
| Audio harmonic distortion | 1.5% typ. (AF 1kHz 40% deviation)
| ||
| Residual modulation | 48/47/42dB typ. (Wide, middle, narrow)
| ||
| FSK error | 2.0% typ.
| ||
RECEIVER
IC-F3262DT/DS | IC-F4262DT/DS | ||
|---|---|---|---|
| Sensitivity | Analogue | −4dBμV emf typ. (at 20dB SINAD)
| |
| Digital | −8dBμV emf typ. (at 5% BER)
| ||
| Adjacent channel selectivity | 78/78/68/60dB typ. (Wide, middle, narrow, digital)
| ||
| Spurious response rejection | 76dB typ.
| ||
| Intermodulation | 67dB typ. (Wide, narrow) 73dBμ emf typ. (Digital) | ||
| AF output power (at 5% distortion) | 800mW typ. (Internal SP, 12Ω load) 1000mW typ. (External SP, 8Ω load) | ||
GPS (Depending on version)
IC-F3262DT/DS | IC-F4262DT/DS | ||
|---|---|---|---|
| Receiver channels | 12 channels
| ||
| Time to first fix (cold start) | 36 seconds typ. (at open sky)
| ||
| Horizontal accuracy | 5m (at open sky)
| ||
FUNCTION COMPARISON AND INTERNAL UNIT OPTIONS
IC-F3262DT/DS
|
IC-F3262DT/DS
|
||
|---|---|---|---|
| Number of option slots | 0 | 0 | |
| CTCSS/ DTCS | encoder | Available | Available |
| decoder | Available | Available | |
| 2-Tone | encoder | Available | Available |
| decoder | Available | Available | |
| 5-Tone | encoder | Available | Available |
| decoder | Available | Available | |
| DTMF autodial | Available | Available | |
| DTMF decoder | Available | Available | |
| Voice Scrambler |
Analogue (Inversion) |
Available | Available |
| Digital | Available | Available | |
| IDAS dPMR | Tier 2 Mode1/2 | Available | - |
| Tier 2 Mode 3 | Available | - | |
| IDAS NXDN | Conventional | - | Available |
| Type-D trunking | - | Available | |
| MPT 1327 | - | - | |
| BIIS 1200 | Available | Available | |
| MDC 1200 | - | Available | |
| LTR™ trunking | - | Available | |
| Man Down function | Available (Depending on version) |
Available (Depending on version) |
|
| GPS | Available (Depending on version) |
Available (Depending on version) |
|
| Intrinsically safe | - | - | |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 G Method, Proc. |
|---|---|
| Low Pressure Storage |
500.5 I
|
| Low Pressure Operation |
500.5 II
|
| High Temperature Storage |
501.5 I
|
| High Temperature Operation |
501.5 II
|
| Low Temperature Storage |
502.5 I
|
| Low Temperature Operation |
502.5 II
|
| Temperature Shock |
503.5 I-C
|
| Solar Radiation |
505.5 I
|
| Rain Blowing |
506.5 I
|
| Rain Drip |
506.5 III
|
| Humidity Induced |
507.5 II
|
| Salt Fog |
509.5
|
| Dust Blowing |
510.5 I
|
| Vibration |
514.6 I
|
| Shock Functional |
516.6 I
|
| Shock Transit Drop |
516.6 IV
|
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
| Ingress Protection Standards (IC-F3262D/F4262D, BP-232WP and HM-184) | |
|---|---|
| Dust & Water |
IP67 (Dust-tight and waterproof protection)
|
