UNIQUE TWO-IN-ONE REPEATERS
The IC-FR5000 series combines superior analog specifications with competitive cost performance. Its slim, rackmount design allows you to install two RF modules* in one unit. In addition, the built-in IDAS digital mode paves the way to a future digital migration now.
* Optional UR-FR5000/UR-FR6000 is required.
Two RF modules in one unit
The IC-FR5000 series has an internal space for installing an optional RF unit, UR-FR5000 series. Two RF modules can be installed in a chassis reducing installation space, and increasing channel capacity. They can be programmed and operated independently.
50W output at 50% duty cycle,
25W 100% duty cycle operation*
Employing a high performance power amplifier, the IC-FR5000 series provides a reliable 100% duty cycle operation at 25W output. When operated at the high power setting of 50W, the repeater operates with a 50% duty cycle.
* Ambient temperature: 25°C
50W output at 100% duty cycle,
100W 50% duty cycle operation with optional Power Amplifier*
When need higher power, the optional UR-PA5000 series power amplifier provides 100W output power with a 50% duty cycle and 50W output with 100% duty cycle.
* Ambient temperature: 25°C
19-inch rack mount design, 2U height low profile design
The IC-FR5000 series has a rack mount bracket and handles for installation in an industry standard 19-inch rack.
Multiple CTCSS and DTCS tone decode
The IC-FR5000 series detects multiple CTCSS and DTCS on a channel (up to 16 tones on a table) and downlinks (transmits) the received signal with a specified tone. This function is useful for sharing a channel with multiple groups.
Base station operation
The IC-FR5000 series has 5 programmable buttons, 12-digit dot-matrix display and 32 memory channels allowing you to use the repeater as a base station.
Other features
- Programmable accessory connector (D-sub 25-pin) for connecting trunking controllers or other external devices
- 5-Tone and DTMF encoder/decoder
- CW ID transmitter
- Normal and priority scan setting
- Wide frequency coverage
- Built-in audio compander
- Optional voice scrambler UT-109R/UT-110R and built-in inversion type voice scrambler*
* Inversion type voice scrambler is not compatible with UT-109R/UT-110R voice scrambler.
General
IC-FR5000 |
IC-FR6000 |
|||
---|---|---|---|---|
Frequency coverage (Varies according to version) |
136-174 MHz
|
400-470 MHz
450-512 MHz 450-520 MHz 350-400MHz (Non - FCC) |
||
Number of channels |
32 ch
|
|||
Channel spacing (Varies according to version) |
6.25/12.5/25 or 7.5/15/30 kHz
|
|||
Type of emission |
16K0F3E,
11K0F3E, 11K0F7E/D/W, 8K50F3E (EXP version only), 4K00F1E/D, 4K00F3E |
16K0F3E,
11K0F3E, 11K0F7E/D/W, 4K00F1E/D, 4K00F3E |
||
Power supply requirement |
13.6V DC
|
|||
Current drain (at 13.6V DC) |
Tx High |
15A
|
||
Rx | Stand-by |
400mA*1
|
||
Max. audio |
1900mA
|
|||
Dimensions (projections not included; W×H×D) |
483×88×260 mm
19.02×3.46×10.24 in |
|||
Weight (approx.) |
5.6kg; 12.3lb
|
*1 Repeater operation only.
Transmitter
IC-FR5000 | IC-FR6000 | |
---|---|---|
RF output power (High) | 50W
| |
Spurious emissions | 80dB
| |
Frequency stability | ±0.5ppm
| |
Audio harmonic distortion | 1% typical 40% deviation | |
FM Hum and Noise | 52dB typ. (W) 49dB typ. (N) | 50dB typ. (W) 45dB typ. (N) |
Digital FSK error | 5% max. |
Receiver
IC-FR5000 | IC-FR6000 | ||
---|---|---|---|
Sensitivity | FM at 12dB SINAD | 0.25µV (typ.)
| |
Digital at 5% BER | 0.20μV (typ.)
| ||
Adjacent channel selectivity (W/N) | 78/56dB typ.
| ||
Spurious response rejection | 90dB typ.
| ||
Intermodulation rejection | 78dB typ.
| ||
AF output power (at 5% distortion) | 4.0W (typ.) with a 4Ω load
|
* | 25kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions. Ask your dealer if you need 25kHz bandwidth. |
FUNCTION COMPARISON AND INTERNAL UNIT OPTIONS
IC-FR5000
|
||
---|---|---|
Type-D multi-site trunking |
UC-FR5000 + CF-FR5000MT
|
|
Type-D single-site trunking |
UC-FR5000
|
|
Type-C trunking |
-
|
|
Multi-site conventional |
UC-FR5000 + CF-FR5000MC*2
|
|
Digital voice scrambler |
available
|
|
DES Encryption |
-
|
|
AES Encryption |
-
|
|
CTCSS/DTCS (Encoder/Decoder) |
available
|
|
2-Tone (Encoder/Decoder) |
-
|
|
5-Tone (Encoder/Decoder) |
available
|
|
DTMF | autodial |
available
|
decoder |
available
|
|
Voice Scrambler*1 | Inversion |
available
|
Non-rolling/ Rolling |
UT-109R/UT-110R
|
|
MDC 1200 |
-
|
|
LTR™ trunking |
available*3
|
|
GPS receiver |
-
|
|
Channel announcement |
-
|
|
Voice recorder |
-
|
|
IP rating |
- |
|
MIL standard |
MIL-STD-810-F
|
*1 | Inversion type voice scrambler is not compatible with UT-109R/UT-110R voice scrambler. |
*2 | Multi-site conventional system must use the IC-FR5000/FR5200H series. Cannot mix with the IC-FR5000C series. |
*3 | External controller required. |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard | MIL-810 F Method, Proc. |
---|---|
High Temperature Storage |
501.4 I
|
High Temperature Operation |
501.4 II
|
Low Temperature Storage |
502.4 I
|
Low Temperature Operation |
502.4 II
|
Vibration |
514.5 I
|
Shock Functional |
516.5 I
|
All stated specifications are subject to change without notice or obligation.