PCT DRS-11L F-Male Compression Connector - (520233)
As with all PCT connectors, the DRS-11 Locking connector still offers the ultimate protection against moisture penetration. Typical fasteners can be relaxed in their turns in normal environmental conditions. What the PCT has designed is an industrial solution to the inherent problem of linking between F-male and F-female. The DRS-11L connector security nut can be re-staged several times at the F-female input as it retains the integrity of its lock. The built-in security system demonstrates that it holds the connector tightly to the F-female input, regardless of vibration and temperature changes. Alternative F-type fasteners require resilience due to temperature and vibration variations.
Possibilities
- DRS-11L-NT connector for use with RG-11 (double, triple and quad shield)
- Patented double compression ring design 360 °
- Easy installation due to:
- > High visibility of the connector position (no blind entry)
- > Tin coating on internal inlets that reduces input force
- Designed for indoor and outdoor applications
- Locking mechanism that guarantees a safe and quality "Metal-to-Metal"
- Easy rotation of the hex nut before and after installation
- Double O-Ring design that prevents moisture from entering all types of cables
- Reduced length after compression for application in narrow spaces
- Complete metal design (nut, entrance and outside are mechanically machined from C360 brass)
- Excellent RFI shield due to the increasing contact force with the cable harness
- High connectivity between cable and connector (easily exceeds SCTE standards)
- Color code for O-Rings and labels (UV-resistant)
- Excellent anticorrosion resistance (1500 hours of salinity exposure)
- Maintaining a 75 ohm cable impedance
- It meets all SCTE and Bellcore specifications
GENERAL SPECIFICATIONS
Bandwidth: 5 MHz to 3 GHz
Impedance: 75 Ohms (Nominal)
Return Loss: Minimum -25 dB to 1 GHz
Shielding Effectiveness: > -100 dB to 300 MHz, > -90 dB to 1 GHz
Insertion Loss: ≤ 0.2 dB @ 3 GHz
Operating Voltage: 90 V (at 60 Hz continuous AC)
Operating Temperature: -40° C to +60° C
Cable Range: RG11 Cable 60% through Quad-Shield
Acceptable Maximum Core Diameter (Dielectric + Tape): 7.39 mm (± 0.010 mm)
Acceptable Minimum Jacket Diameter: 9.90 mm (± 0.200 mm)
Acceptable Maximum Jacket Diameter: 10.55 mm (± 0.200 mm)
Cable Retention: >31.75 kg (70 lbs), ambient temperature
Cable Insertion: <20 lbs maximum insertion force, ambient temperature
PHYSICAL CHARACTERISTICS
Construction Material: Nickel Tin Plated Brass
Length Before Compression: 45.00 mm
Pin Diameter: 0.80 mm
Pin Construction: Beryllium Copper with Tin Plating
Insulator: High Density Polyethylene
Mating Mechanism: 7/16 Hex 3/8-32 UNEF Threading
Customers also bought
