Optical Receiver Flare FRWOW1RX

302,44
(375,03 με ΦΠΑ)
051.0823
Μη Διαθέσιμο
The FLARE-way system operates at two optical wavelengths, so you can send DiSEQc control signals from set-top-boxes to the LNB (Dish), on the same fiber used to transport the SAT-IF signals from 850 to 2150 MHz Connected to an SCR LNB or router SCR, can transform the output from coax to optical and then take much longer distances and with fewer losses.

If you connect a 4 port LNB SCR IF, 4 IF port will then be available at the end of the fiber is, once connected the receiver. You can cascade connection of SCR router, each port can be brought to the fiber distribution systems in relocated villages, residential quarters and so on. The total number of sockets available depends on the number of ports available SCR. The bandwidth extends down to about 100 MHz, so you can enter the digital terrestrial signals, once received, amplified and leveled properly.

The maximum level it’s 75dB. This way you can connect multiple users in optical fiber, which will have to receive a satellite (eg hot bird) and digital terrestrial signals.
technical specification
Typical output power laser FP 1310nmdBm-3 (picco laser=on)
Bandwidth RX 1550nmMHz950-215
Sat-IF outputdBµV55 (min.) / 65 (typ.) / 75 (max.) (con att ottica=6dB)uguale ingresso all’unità “LT"
22KHz tone burst on power supplyVpp0,15 (min.) / 3 (max.)
Units connected with 100mt Fiber Optical and Optical attenuator
Att. Optics which realizes a gain of zero dBdB6 | (IF livellata a 65 dBuV) segnale uscita NU = segnale ingresso LT
Optical attenuation operational for the IFdB15 | IF=2092MHz C/N in= 8 dB trasponder input a 65 dBuV.; C/N out = 6 dB
Optical attenuation operational for 22 kHz tone burstdB20 (typ.) / 23 (max.)
Output Level 2 tones at -35 dB IMD3dBµV99 Aopt=6 dB | 94 Aopt=10 dB | 87 Aopt=15 dB | 77 Aopt=77 dB